NFC Epoxy Key Tag 35 mm Circle with Raised
Top Instructions
Instructions
– Place all artwork elements in the “Customer Artwork” parent layer
– Do not modify the template in any way
– All elements except for images should be vector graphics
– Use high-quality images of at least 300 dpi
– Embed images into the file; do not link images
– Lines should be 0.5 pt or thicker
– Do not include a line or a border around the artwork edge; it will not look good
– Convert text to outlines (unless it’s variable text); required if using non-standard fonts
– Text should generally be 7 pt or higher to be readable
– For variable elements (text, barcode) put an example (position, size, font…) in the “Variable Elements” layer
– Barcodes must have a border of white “quiet zone” in order to be scannable; black barcodes are best
– If PMS colors are used, including the PMS color code in the layer name
– Do not flatten layers before saving
– Edit and save the file in the existing CMYK color mode
– Save the file in the Adobe Illustrator file format (.ai) with “PDF Compatible” enabled
Print Lines
Bleed: Extend the artwork background (if exists) to fill to the bleed line to prevent a white border at the edge. Do not place artwork elements within this area.
Trim: The area of the physical product; artwork outside this area will be trimmed off.
Safe: Keep all artwork elements (text, logos, icons…) inside this area to ensure it is printed. The background artwork (if exists) should extend to the bleed line.
Additional Information
– none
For additional information about artwork and printing, visit the Store’s help site at: https://learn.gototags.com
GoToTags Connected Things Learning Center
