Atm Sb-carett-sb Shellbox Carett User Manual

SB-CARETT-SB Shellbox Carett

Product Information

The SB-CARETT-SB is an AMT vault designed to provide excellent
protection performance for underground installations in the
electrical, energy and telecommunication sector. The vault is made
from recycled polyethylene bags and is designed to withstand
mechanical and environmental resistance, providing high load
capacity, flame retardant protection, resistance to sunlight,
abrasive wear, and resistance to a variety of chemical agents. The
product is made and tested under international standards and its
modular assembly facilitates transportation, storage, and
installation.

Characteristics

• Made from fully recycled polyethylene material
• Provides high load capacity and flame retardant protection
• Resistance to sunlight, abrasive wear, and a variety of
  chemical agents
• Modular assembly facilitates transportation, storage, and
  installation
• Designed and tested under international standards

Technical Specifications

Normativity and Standards

The SB-CARETT-SB is manufactured in compliance with the
following standards:

• Pedestrian/Light Duty ANSI/SCTE 77 TIER 15 ANSI/SCTE 77 TIER
  22
• Pedestrian/Light Duty AS3996-Class B AS3996-Class C
• Pedestrian/Light Duty EN 124 Class B125 EN 124 Class C250

Product Usage Instructions

The SB-CARETT-SB is a modular assembly that facilitates
transportation, storage, and installation. Here are the steps to
follow for proper usage:

1. Choose a suitable location for the vault. It is designed for
   underground installations in the electrical, energy and
   telecommunication sector.
2. Prepare the site by excavating a hole that is suitable for the
   vault dimensions, which are 120 cm in width, 120 cm in length, and
   60 cm in height.
3. Assemble the parts of the vault, including the lower frame,
   side panels, top frame, curb, leveling ring (if applicable), and
   cover. Use the hexagonal screws and stud bolts or eye bolts to
   secure the parts together.
4. Place the assembled vault into the excavated hole and ensure
   that it is level. Use the lateral cavities for better anchoring and
   subterranean anchorage for walls up to 2 inches thick.
5. Use the handle on the cover to lift it up when needed. The
   cover is secured with galvanized hexagonal screws for added
   security.
6. The SB-CARETT-SB can withstand high loads and resistance to a
   variety of chemical agents, abrasion, and sunlight. It is suitable
   for use in areas with intense and heavy traffic such as sidewalks,
   gardens or vehicular streets.

Version: 00 Date: 22/02/2022
SB-CARETT-SB

DESCRIPTION

AMT vaults are designed based on the highest demands

of mechanical and environmental resistance, providing

an excellent protection performance for underground

installations in the electrical,

energy and

telecommunication sector. Its modular assembly facilitates

transportation, storage and installation.

This product is made from recycled polyethylene bags, on strength of the commitment we have of contributing to the ecological balance.
Provides high load capacity, flame retardant protection, resistance to sunlight, abrasive wear, resistance to a variety of chemical agents, in addition to its design, made and tested under international standards.

CHARACTERISTICS
· · · · · · · · ·
· Manufactured with a modular body of low density polye-
thylene, fully recycled, while maintaining excellent resistance.
· It is recommended to be used in telecommunications,
energy, and electrical substations.
· The cover is secured with galvanized metal hexagonal
screws and has handles on the sides for better handling and opening.
· Self-extinguishing material, resistant to solar radiation
and abrasion.
· Provides protection against a wide range of chemical
agents such as: acids, ketones, solvents, gasses, water vapor, etc.
· Its modular design allows it to be easily transported,
stored and assembled.
· Withstands loads of up to 25 tons in compression and
tension.
· Optimum to be installed in different environments such
as sidewalks, gardens or vehicular streets with intense and heavy traffic.
· Structural design with lateral cavities provides greater
support and subterranean anchorage, allowing walls up to 2 inches thick.

Version: 00 Date: 22/02/2022

Handle for cover lifting.

Customization area with logo.

Hexagonal screws for cover security.

High relief anti-slip surface.

Lateral cavities for better anchoring.

Variety of colors according to requirements.

Optional leveling ring.

TECHNICAL SPECIFICATIONS
··············

General register

Parameter

Value

Distributed load capacity

25 tons

Point load

17 tons

Fatigue strength

1000 cycles with 14.5 Kgf

Flexion

26 mm, 15 Tons

Manufacturing material

Low density polyethylene

Total weight (shellbox, curb and cover)

195.6 Kg

Leveling ring weight (optional)

5 cm 10 cm 15 cm

20.5 Kg 41 Kg 61.5 Kg

Width

120 cm

General dimensions

Length

120 cm

Height

60 cm

Low Density Polyethylene

Nomenclature (Spanish/English)

PEBD/PELD

Density

0.922 g/cm3

Breaking strain

20/20 Mpa

Elongation at breaking point DM/DT

380/910 %

Impact resistance

230 g/F50

NORMATIVITY AND STANDARDS
··············
ALT’s modular registers are manufactured in full compliance with the following standards, endorsed and certified by the Equipment and Materials Testing Laboratory LAPEM.

Version: 00 Date: 22/02/2022

Specification
Pedestrian/Light Duty ANSI/SCTE 77 TIER 15 ANSI/SCTE 77 TIER 22
Pedestrian/Light Duty AS3996-Class B AS3996-Class C
Pedestrian/Light Duty EN 124 Class B125 EN 124 Class C250

Test load

lbf

kN

American

3000

14

22500

100

33750

150

APAC

3370

15

18000

80

33750

150

EMEA

2250

10

28100

125

56202

250

PARTS LIST
· · · · · ·
Part
Lower frame 120×60 cm side panels Top frame Curb Leveling ring 5 cm Leveling ring 10 cm Leveling ring 15 cm Cover Galvanized hexagonal screws 2 1/2″ screws Stud bolts or eye bolts
DIMENSIONAL SCHEME
· · · · · · · · · · ·
Curb interior entrance 726 mm)

Version: 00 Date: 22/02/2022

Quantity
1 piece 4 pieces 1 piece 1 piece Optional Optional Optional 1 piece 2 pieces 16 pieces 4 pieces

Code
MI-CARETT-CORI-SB L120-CARETT-CORI-SB MS-CARETT-CORI-SB
B-CARETT-CORI-SB A05-CARETT-CORI-SB A10-CARETT-CORI-SB A15-CARETT-CORI-SB
T-CARETT-CORI-SB –

Exterior height 600 Total height 846

1220

1220

Dimension
Width Length Height
ASSEMBY STEPS
· · · · · · ·

Carett

Exterior

Interior

1220

1106

1220

1106

600

524

Version: 00 Date: 22/02/2022
Unit
mm mm mm

1 Place the lower frame (refer to the image) on the floor.

2 Install one of the 120×60 cm sidewalls on the frame, using a mallet.

3 Place another of the 120×60 cm sidewalls on the orther side of the frame, taking into account the coincidence of the malefemale assembly of its edges.

4 Repeat the previous step with the same type of frame, alternating the assembly of the edges.

5 Install the remaining side in such a way that it fits correctly with the rest of the previously installed faces.

6 Install the top frame.

7 Attach 4 2 1/2″ screws or dowels to secure the top frame to the side faces. The figure shows how to install 4 screws in one of the faces, do the same with the remaining faces.

8 Place the leveling ring (optional) on the upper frame if your configuration requires it, otherwise continue with the next step.

9 Place the register curb on the upper frame or on the leveling ring (if step 8 has been applied).

Version: 00 Date: 22/02/2022

10 Rearrange the curb and leveling ring so that the 4 holes 3/4″ diameter line up with the holes in the upper frame, now place the 4 studs or eyebolts, and tighten them with their respective nut and washer.

11 Place the cover on the curb using the handles.

12 Finally, install 2 hexagonal screws to tighten the cover to the curb.

ORDER CONFIGURATION
· · · · · · · · · · ·

SB-CARETT-SB N/ C/ HT/ HTM

N: Black

HT: Color on cover HTM: Color on cover and frame

C: Full Color

VERSION CONTROL
· · · · · · · · ·

Ver. No. 00

Date 22/02/2020

Description Original emission

Revised by Martín S. M.

Approved by Alicia Soto