Gemini1800 Super Deep Double Ended Inset Bath Instruction Manual

GEMINI1800 Super Deep Double Ended Inset Bath

Product Information

The product is a quality acrylic bath manufactured in the UK. It
comes with a 25-year guarantee and is made with magnets within the
waste cover. Please note that the bath model supplied may vary from
the illustrations and specifications provided in the manual.

Product Usage Instructions

  1. Before starting the installation, read through the instruction
    booklet thoroughly.
  2. If you are unsure about any aspect of the installation, it is
    recommended to contact a reputable tradesperson for
    assistance.
  3. Remove all packaging and film from the bath, and carefully
    examine it for any damage or color match issues before
    fitting.
  4. Do not proceed with fixing the bath if there are any refixing
    costs or claims for wrong color match and/or other faults. Such
    claims will not be accepted once the bath is fitted.
  5. Note that the product contains magnets within the waste cover,
    so handle it with caution.
  6. Ensure that you have the following tools for the installation:
    spirit level, pozi screwdriver, spanners (17mm & 19mm), pencil,
    tape measure, junior hacksaw, drill, appropriate drill bit, sealant
    gun, and sealant. Please note that the tools shown in the manual
    are not supplied.
  7. Use the provided parts, including 720mm channels, M12 x 120mm
    Allthreads, 16mm self-tapping screws, wall fixing brackets, M12 x
    65mm plastic foot, M12 nuts, 400mm jack legs, C channel metal foot
    bracket, M10 nuts, and M10 – 250mm oval foot.
  8. If any parts are damaged or missing, contact your point of
    purchase for assistance in obtaining replacement parts.

Please follow these instructions carefully to ensure proper
installation and usage of the Amare Bath.

5 2 3 6
1
3 4

5 5

6

2

2 3

3

3

6

5

8

5

6

2 3

6

2

3

3

3 6

8

1

6 4

5 2 3
6

Quality Acrylic Baths
Manufactured in the UK
Amare Bath Installation Instructions
– Read through the instruction booklet first before commencing any work. If you are unsure of any aspect of the installation, we recommend you contact a reputable tradesperson.
– Prior to fitting your bath, carefully remove all the packaging and film from the bath and examine the bath for damage and suitability of colour match.
– Any refixing costs or claims for wrong colour match and/or any other fault will not be accepted after fixing.
No claims for the above will be accepted once the bath is fitted.
WARNING – This product contains magnets within the waste cover.

3

4

3

10
4 9

7

3

3

Please note, illustrations and specifications are not binding in detail. The bath model supplied may vary. P4

10 9

7

3

3

Made in UK

25
Year Guarantee

Please note, the bath shown is for illustration purposes only.
V1/090418 1028

Amare Bath Installation Instructions
Before you start – Before fixing remove ALL protective covering and examine carefully. The polythene film must be removed in full and the bath checked for any visible damage. – Unpack and check the product is complete and undamaged. – Have the correct tools available. – Please notify the retailer immediately of any damage or faults. The manufacturer cannot be held responsible for any installation costs that may arise from damaged or faulty product being installed. The guarantee does not cover impact related damage. Please dispose of all packaging with due regard to the environment. Safety – Handle the bath with care. – This product is heavy and requires two persons to carry. – When drilling walls, check first for hidden pipes and cables. – Use safety eyeware when drilling. – Keep small parts away from children.
Tools required

Spirit Level

Pozi Screwdriver

Spanners (17mm & 19mm)

Pencil

Tape Measure Junior Hacksaw

Drill

Appropriate Drill Bit

*Tools shown not supplied *Ensure drill bit used is suitable for wall surface!

P2

Sealant Gun & Sealant

Parts provided

1

2

3

720mm Channels x2

M12 x 120mm Allthreads x6

16mm Self Tapping Screws x24

4

5

6

Wall Fixing Brackets x4

M12 x 65mm Plastic Foot x6

M12 Nuts x18

7

8

9

400mm Jack Legs x2

C Channel Metal Foot Bracket x2 10

M10 Nuts x2

M10 – 250mm Oval Foot x2 – We have taken great care to ensure that this product reaches you in perfect condition. However should any parts be damaged or missing please contact your point of purchase. This does not affect your statutory rights. In addition if you require replacement parts your point of purchase will be happy to assist.

V1/090418 1028
P3

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals