Hampton Bay A210024700 River Haven Bistro Table User Manual

HAMPTON BAY A210024700 River Haven Bistro Table

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this Table. We strive to continually create quality products designed to enhance your home. Vísit us online to see our full ine of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Important Safety Instructions

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:

1. Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Some parts may contain sharp edges. Wear protective gloves.
3. Please count the parts before assembly.
4. Set up your furniture properly. Ensure that all parts are assembled properly and fully tightened as per instructions. When placing in the desired location, ensure that all legs are resting on the same surface. You may adjust the leg levelers as required to ensure that the item stands in a level position.
5. Examine occasionally to ensure that there are no loose parts. If loose parts are found, they must be re-tightened fully before additional use.

• DANGER: Keep children and parts away from the assembly area.
• WARNING: To avoid destroying the finish, please handle the surface by using a soft cloth instead of your bare hands. A\ Due to the nature of iron, surface oxidation (rusting) will occur If these protective coatings are scratched. We recommend an immediate touch-up with rust-inhibiting paint (not included}.
• CAUTION: Do NOT over-tighten any of the bolts or nuts.

WARRANTY

3 YEAR WARRANTY

WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of 3 years.

WHAT IS NOT COVERED
We do not reimburse for transportation or delivery costs or compensate the individual or any outside party for assembling or disassembling the product.

Contact the Customer Service Team at 1-800-841-1350 or visit www.Hamptonbay.com. Production Number: 2021200281.

RIVER HAVEN BISTRO TABLE

Pre-Assembly

PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.

IMPORTANT
This assembly requires one to two people. Approximate assembly time: 15-20 minutes.

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS

Assembly

1. Connecting the Legs and Table Top
   • Connect the legs (B) and tabletop (A) using 12 bolts (H1), and use the wrench (HW1) to loosely tighten the bolts.
     NOTE: To preserve the finish, place parts on a soft surface.
2. Attaching the Connector
   • Connect the legs (B) and connector (C) using 4 bolts (H1), and use a wrench (HW1) to fully tighten the bolts.
     NOTE: To preserve the finish, place parts on a soft surface.

Care and Cleaning

• Before using, clean the Table completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
• When not in use, store in a cool, dry area.

RIVER HAVEN MOTION CHAIR

Pre-Assembly

PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.

IMPORTANT
This assembly requires one to two people. Approximate assembly time: 0.5 hours.

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS

Assembly

1. Attaching the Left Armrest
   • Connect the back connector bar (F) and left annrest (B) using 2 bolts (H1), use the wrench (HW1) to loosely tighten the bolts.
   • Connect the middle connector (D) and left armrest (B) using 2 bolts (H2), use the wrench (HW2) to loosely tighten the bolts.
     NOTE: To preserve the finish, place parts on a soft surface.
2. Attaching the Right Armrest
   • Attach the right armrest (C) to the back connector bar (F) using 2 bolts (H1), use the wrench (HW1) to loosely tighten the bolts.
   • Attach the right armrest (C) to the middle connector (D) using 2 bolts (H2), use the wrench (HW2) to loosely tighten the bolts.
     NOTE: To preserve the finish, place parts on a soft surface.
3. Attaching the Back
   • Connect the back (A), connectors (E) and middle connector (D) using 4 bolts (H3), spring washers (H4), flat washers (H5) and nuts (H6). Use the wrench (HW2) to fully tighten the bolts.
     NOTE: To preserve the finish, place parts on a soft surface.
4. Placing the Cushions
   • Place the seat cushion (G) and back cushion (J) on the chair, hook and loop.

Care and Cleaning

• Before using, clean the Chair completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
• When not in use, store in a cool, dry area.

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-841-1350
HAMPTONBAY.COM

Retain this manual for future use.