MESH SECURITY BED RAIL
Owner’s Manual
419-W Lightweight Mesh Security Adjustable Bed Rail
Read all instructions before assembling and using the product.
IMPORTANT – Keep Instructions for future use.
Scan the QR code to register your product: https://dreamonme.com/customercare/registration/
WARNINGS
- READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY TO ENSURE THAT YOUR PRODUCT IS PROPERLY INSTALLED.
- IMPROPER INSTALLATION COULD RESULT IN UNSTABLE OR UNSAFE USE.
- PLEASE KEEP THESE INSTRUCTIONS FOR YOUR REFERENCE.
- NEVER USE THE BED RAIL WITHOUT PROPERLY SECURING THE BED RAIL TO THE BED.
- GAPS IN AND AROUND BED RAILS HAVE ENTRAPPED YOUNG CHILDREN AND KILLED INFANTS.
- NEVER USE WITH CHILDREN YOUNGER THAN 2 YEARS OLD. THIS BED RAIL IS INTENDED FOR USE WITH CHILDREN 2 YEARS TO 5 YEARS OF AGE.
- USE ONLY WITH OLDER CHILDREN WHO CAN GET IN AND OUT OF ADULT BEDS WITHOUT HELP.
- NEVER USE IT IN PLACE OF THE CRIB.
- NEVER USE UNLESS THE BED RAIL IS TIGHT AGAINST THE MATTRESS, WITHOUT GAPS, AND AT LEAST 9 INCHES FROM THE HEADBOARD AND FOOTBOARD.
- DO NOT FILL GAPS WITH PILLOWS, BLANKETS, OR OTHER ITEMS THAT CAN SUFFOCATE CHILDREN.
- NEVER USE ON A TODDLER BED, BUNK BED, WATER BED, OR BED WITH INFLATABLE MATTRESSES.
- USE ONLY ON ADULT TWIN SIZE BED WITH MATTRESS AND MATTRESS SUPPORT.
- PERIODICALLY CHECK THE BEDRAIL FOR TIGHTNESS TO ENSURE THE BEDRAIL IS SNUG AGAINST THE BED.
- PLEASE VISIT DREAMONME.COM FOR A COMPLETE VIDEO TUTORIAL.
ENTRAPMENT HAZARD:
- NEVER USE BED RAIL WITHOUT INSTALLING DISK AND STRAP ASSEMBLY ONTO THE BED.
- INCORRECT INSTALLATION CAN ALLOW THE BED RAIL TO MOVE AWAY FROM THE MATTRESS, WHICH CAN LEAD TO ENTRAPMENT AND DEATH.
- DISCONTINUE USE IF DAMAGED, BROKEN OR IF PARTS ARE MISSING. CONTACT DREAM ON ME INC. FOR REPLACEMENT PARTS AND INSTRUCTIONS.
THANK YOU…
…. for choosing Dream On Me and congratulations on joining our family; a family that has been transforming lives for over 30+ years! We appreciate your feedback and wish you the very best in the coming years with your new addition. If you have any questions or concerns please don’t hesitate to reach out to us. One of our trusted Customer Care representatives will be happy to assist you. Thank you again for entrusting us to provide you with safe and affordable baby products and accessories.
LIMITED WARRANTY:
- Dream On Me warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect.
- This warranty covers 1 year from the date of original purchase.
- This warranty is valid only upon presentation of proof of purchase.
- This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included.
- This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse, or which has been altered or repaired in any way.
- This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
PARTS
If there are any missing parts, please contact Dream On Me before using the product.
 |  |
| 1. Mesh Rail | 2. Support Rail with Safety Harness |
BED RAILS ASSEMBLY
1.
1a. Place the parts to be assembled on a flat, horizontal surface.
1b. Align the Mesh Rail (1) to the Support Rail with Safety Harness (2) as shown in the illustration.
1c. Insert the Mesh Rail in the Support Rail with Safety Harness until you hear a click.
 |  |
2.
2a. Measure the height of the mattress. Use the rail only if the mattress height is less than 5”.
2b. Adjust the height of the rail to A or B with the spring lock button as shown in the illustration.
NOTE:
- If the mattress height/thickness is over 5″ do not use the bed rail. The bed rail is not suitable for mattresses with thickness over 5”.
 |  |
3.
3a. Remove the mattress from the mattress support. Take the assembled bed rail and place it on top of the mattress support.
3b. Align the bed rail on the mattress such that the mesh rail is at the front edge of the mattress support.
3c. Stretch straps across the frame of the mattress support to the opposite end such that the disk is fixed on the back end of the mattress support edge as shown in the illustration.
3d. Adjust the strap length to fit within the width of the mattress support.
4.
4a. Place the mattress on top of assembled bed rail and mattress support.
4b. Ensure that the bed rail is fixed tight against the mattress without any gaps.
5.
5a. The bed rail will now look like this after being installed on the mattress.
 |  |
MAINTENANCE
- PERIODICALLY CHECK THE BED RAIL FOR SIGNS OF DAMAGE, WEAR, AND/OR MISSING COMPONENTS.
- DO NOT USE IF ANY PART IS MISSING, WORN, OR DAMAGED.
- CHECK THE BED RAIL REGULARLY TO MAKE SURE ALL HARDWARE AND MOUNTINGS ARE TIGHT AND SECURE.
- NO PART OF THE BED RAIL REQUIRES LUBRICATION.
- CLEAN THE BED RAIL USING WARM SOAPY WATER, OR A DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS OR BLEACH TO CLEAN THE BED RAIL.
YOU DID IT!
It’s time to make your little one sleep happy and safe, both during the day and at night!
1532 S. WASHINGTON AVE STE1
PISCATAWAY, NJ 08854-9908
E-mail: [email protected]
www.dreamonme.com
Follow Us @dreamonmeinc to get your nursery featured on our social media.
Enter our monthly giveaway! | Chat with us! |
 https://qrcodes.pro/I3ILzd |
Dream On Me | Quality baby products and furniture
Dream On Me | Quality baby products and furniture
