Aoibox SNMX496 Frame Rectangle Wall Mounted Full Length Dressing Mirror
Applicable Installation Environment
Make sure that the wall is in smoothness, and do not stick on any wallpaper.
Applicable installation environment
Wood wall / tile wall / metal wall / glass wall / latex paint wall
Wood wall / tile wall / metal wall / glass wall / latex paint wallNot Applicable installation environment
long-term in moist wall / wallpaper / dusty wall
long-term in moist wall / wallpaper / dusty wallInstallation Steps
( Horizontally or Vertically )
- Load-Carrying Check
- Check the load-carrying capacity of the wall, and make sure it can bear the weight of the mirror.
- Measure off
- Mark the distance on the wall at a required height.
- Punch Holes
- Drill four holes of 0.23-0.31 inches in diameter and 1.98 inches in depth at arranged position.
- Drill four holes of 0.23-0.31 inches in diameter and 1.98 inches in depth at arranged position.
- Expansion screw
- Put the metal screws into the plastic expansion screws
- Hang Mirror
- Hang the mirror onto the wall then install the mirror holders.
- Complete Installation
- Make sure the mirror is securely mounted and there are no signs of looseness.
