4058075729308
SMART+ ZIGBEE
INSTALLATION GUIDE
4058075729308 Smart+Outdoor Plug
| EAN | Wmax. | V~ | mAmax | Hz | |
| SMART PLUG EU | 4.06E+12 | 3680 | 220-240 | 16000 | 50/60 |
PAIRING WITH PARTNER APP
TROUBLESHOOTING
DECREASE DISTANCE
RESET
FAQ
https://smartplus.ledvance.com/faq
CUSTOMER SUPPORT
https://smartplus.ledvance.com/support
[email protected]
Hereby, LEDVANCE GmbH declares that the radio equipment type LEDVANCE SMART+ Device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: smartplus.ledvance.com/declaration-of-conformity. The SMART+ Plug/Plug Outdoor switches connected appliances without separating them from the mains. Under adverse conditions, very high capacitive and inductive loads may lead to destruction of the device or may reduce the number of switching cycles. Wireless radio used in Zigbee lamps/ luminaires /components 2400–2483.5 MHz, max. RF output power 9.5dBm. Devices building up heat must be separated from the mains, i.e. from SMART+ Plug/Plug Outdoor to avoid accidental activation. Please make sure to disconnect SMART+ Plug/Plug Outdoor from the mains voltage before undertaking any maintenance works. In case of disconnection of the mains (i. e. power outage) the SMART+ Plug/Plug Outdoor will remain in stand-by mode. Please do not use the SMART+ Plug/Plug Outdoor together with medical devices. The plug is to be installed near the device and must be readibly accessible. De-energised only with plug disconnected. Do not operate when covered. Warning: Do not insert in a row
C10567405 / G11136794
03.05.2022
LEDVANCE GmbH
Steinerne Furt 62
86167 Augsburg, Germany
www.ledvance.com
Declaration-of-conformity | LEDVANCE
Vance.com
SMART+ FAQ | LEDVANCE
