Sihanm B0bjz4cwff Instant Canopy Pop Up Tent Instruction Manual

B0BJZ4CWFF Instant Canopy Pop Up Tent

Product Information: Canopy Setup

The Canopy Setup is a portable shelter that provides shade and
shelter from the sun. It is designed to be easy to set up and take
down, making it perfect for outdoor events, picnics, and camping
trips. The canopy is made of durable fabric that is resistant to
water and UV rays, ensuring that it will last for many years of
use.

Quick Setup Instructions

Before using the canopy, refer to the original owner’s manual
for complete use, care and safety information. Follow these quick
setup instructions to set up your canopy:

1. Open the Canopy Frame: With a person on each
   corner, lift and partially pull the canopy frame apart.
2. Lock the Canopy Frame: Push the roof locking
   mechanism upward while holding the leg down. A snap button will
   engage in the locating hole. Repeat on all corners.
3. Attach Canopy Fabric: Unfold the canopy top
   and place on top of the canopy frame. Secure the canopy top to the
   frame using the hook and loop fastener connections.
4. Adjust the Canopy Height: Press the red button
   on each leg to raise/lower the canopy height. A snap button will
   engage in the locating hole. Repeat on all corners.
5. Anchor the Canopy: WARNING: Never set up or
   continue to use in rain, wind, or storm conditions, especially
   lightning storms.

Once you have completed these steps, your canopy will be ready
to use. Enjoy your time outdoors with the shade and shelter
provided by your canopy setup!

Canopy Setup
QUICK SETUP INSTRUCTIONS ONLY! Refer to the original owner’s manual for complete use, care and safety information.

1 OPEN THE CANOPY FRAME
With a person on each corner, lift and partially
pull the canopy frame apart.

2 LOCK THE CANOPY FRAME
Push the roof locking mechanism upward while holding the leg down. A snap button will engage in the locating hole. Repeat on all corners.

3 ATTACH CANOPY FABRIC
Unfold the canopy top and place on top of the canopy frame.
Secure the canopy top to the frame using the hook and loop fastener connections.

4 ADJUST THE CANOPY HEIGHT
Press the red button on each leg to raise/lower the
canopy height. A snap button will engage in the
locating hole. Repeat on all corners.

5 ANCHOR THE CANOPY
Insert a stake through each foot of the canopy. Attach one end of each rope to each corner of the canopy fabric. Tie the ropes to the stakes and insert the stakes into the ground at a 45° angle.
WARNING: Never set up or continue to use in rain, wind, or storm conditions, especially lightning storms.