Kind Led Grow Lights Bzr-x Series Led Driving Lights User Manual (+ PDF)

Home » Blog » Kind Led Grow Lights Bzr-x Series Led Driving Lights User Manual

Contents hide

1 BZR-X Series LED Driving Lights

2 Product Information:

2.1 X220 Specifications:

2.2 X330 Specifications:

2.3 X420 Specifications:

2.4 X750 Specifications:

3 Product Usage Instructions:

3.1 Setup for X220, X330, and X420:

3.2 Setup for X750:

3.3 Documents / Resources

3.3.1 References

BZR-X Series LED Driving Lights

Product Information:

The Kind LED Grow Light is a high-quality grow light designed to
provide optimal lighting for plant growth. It comes in different
models, including the X220, X330, X420, and X750. These models
differ in terms of their specifications and dimensions.

X220 Specifications:

Spectrum: Full Spectrum
Efficacy: 2.55umol/J
PPF: 561umol/s
Max Wattage: 220 +/- 5%
Input Voltage: 120-277V
Lifetime: 100,000 Hrs.
Dimensions: 19.75 x 19.75
Cord Length: 6′ +/- 12
Warranty: 5 Year
Certifications: FCC, ETL

X330 Specifications:

Spectrum: Full Spectrum
Efficacy: 2.55umol/J
PPF: 841umol/s
Max Wattage: 330 +/- 5%
Input Voltage: 120-277V
Lifetime: 100,000 Hrs.
Dimensions: 19.75 x 33.5
Cord Length: 6′ +/- 12
Warranty: 5 Year
Certifications: FCC, ETL

X420 Specifications:

Spectrum: Full Spectrum
Efficacy: 2.55umol/J
PPF: 1071umol/s
Max Wattage: 420 +/- 5%
Input Voltage: 120-277V
Lifetime: 100,000 Hrs.
Dimensions: 19.75 x 44.75
Cord Length: 6′ +/- 12
Warranty: 5 Year
Certifications: FCC, ETL

X750 Specifications:

Spectrum: Full Spectrum
Efficacy: 2.55umol/J
PPF: 1730umol/s
Max Wattage: 750 +/- 5%
Input Voltage: 120-277V
Lifetime: 100,000 Hrs.
Dimensions: 42.5 x 44.75
Cord Length: 6′ +/- 12
Warranty: 5 Year
Certifications: FCC, ETL

Product Usage Instructions:

Setup for X220, X330, and X420:

The X220, X330, and X420 models come fully assembled. Unpack
the fixture and place it on a safe and stable area below the
desired hanging location.
Attach one wire hanger to each end of the fixture through the
metal mounting eyelets on the top side of the fixture.
Lower the ratchet hangers to the center of the wire hanger and
connect them. Raise the light to the desired position.

Setup for X750:

The X750 model also comes fully assembled. Unpack the fixture
and place it on a safe and stable area below the desired hanging
location.
Attach one wire hanger to each end of the fixture through the
metal mounting eyelets on the top side of the fixture.
Lower the ratchet hangers to the center of the wire hanger and
connect them. Raise the light to the desired position.
If you want to mount the driver remotely, you can use the 8 ft.
driver extension cord (sold separately).
1. Disconnect the DC output cord from the fixture, but keep it
  connected to the driver.
2. Using a Phillips-head screwdriver, remove the four screws
  connecting the driver to the driver mounting brackets.
3. Securely mount the driver in its new location.
4. Connect the DC output extension from the fixture to the open
  end of the DC output cord.

Please refer to the user manual for more detailed instructions
on best practices and additional information about the product.

View Fullscreen

USER MANUAL

WELCOME TO THE FAMILY
Thank you for choosing to grow with Kind LED! We are committed to providing you with the highest quality grow lights and industry leading customer support. If you have any questions regarding the set up or operation of your new Kind LED Grow Light, our customer service team is ready to help.

X750 DRIVER INSTALLATION VIDEO

GROW STRONG SUPPORT

Phone: 1-855-448-4769 Web: support.growstrongindustries.com

TABLE OF CONTENTS

OVERVIEW

COMPONENTS

SET UP X220 | X330 | X420

SET UP X750

BEST PRACTICES

OVERVIEW

X220

X330

19.75″ 19.75″

33.5″

19.75″

SPECIFICATIONS

Spectrum Efficacy PPF
Max Wattage Input Voltage
Lifetime Dimensions Cord Length
RMH Warranty Certifications

X220
2 Channel 2.55umol/J 561umol/s 220 +/- 5% 120-277V 100,000 Hrs. 19.75″ x 19.75″ 6′ +/- 12″ 5 Year FCC, ETL

X330
2 Channel 2.55umol/J 841umol/s 330 +/- 5% 120-277V 100,000 Hrs. 19.75″ x 33.5″ 6′ +/- 12″ 5 Year FCC, ETL

X420
2 Channel 2.55umol/J 1071umol/s 420 +/- 5% 120-277V 100,000 Hrs. 19.75″ x 44.75″ 6′ +/- 12″ 5 Year FCC, ETL

X750
2 Channel 2.55umol/J 1730umol/s 750 +/- 5% 120-277V 100,000 Hrs. 42.5″ x 44.75″ 6′ +/- 12″ 5 Year FCC, ETL

X420

X750

44.75″

19.75″

42.5″

PROFILE

3.25″

6″

OUTPUT

Full Spectrum

0% 25% 50%

Cluster

Dimming

75%

100%

Red + IR + UV

0% 25% 50%

Cluster

Dimming

75%

100%

Cluster Dimming Control

2″

1.25″

COMPONENTS

X220

X330

X420

X750

6 ft. 120V Power Cord 12 in. DC Output Cord

6 ft. 120V Power Cord 16 in. DC Output Cord

6 ft. 120V Power Cord 10 in. DC Output Cord

(2) Wire Hangers
(2) Yo-Yo Ratchet Hangers RJ-14 Data Cable

(4) Yo-Yo Ratchet Hangers RJ-14 Data Cable
Driver

Driver

(2) Driver Mounting Brackets

X750 8 ft. DC Output Extension (SOLD SEPARATELY)

8 ft. DC Output Extension

(SOLD SEPARATELY)

SET UP X220 | X330 | X420
1 The X220, X330, & X420 X Series come fully assembled, ready to grow. Unpack the fixture and place the light on a safe and stable area directly below the desired hanging location.
CAUTION: The LED boards have a conformal coating to resist moisture, but are vulnerable to diode damage if handled improperly. Please make sure LED surfaces are protected from abrasion while handling.

2 Attach one wire hanger to each end of the fixture through the metal mounting eyelets found on the top side of the fixture.
Lower the ratchet hangers to the center of the wire hanger and connect. Raise the light to the desired position.
3 The X Series driver can be mounted remotely with the 8 ft. driver extension cord (sold separately).
1. Disconnect the DC output cord from the fixture, leaving it connected to the driver
2. Using a Phillips-head screwdriver, remove the four (4) screws connecting the driver to the driver mounting brackets
3. Securely mount the driver in its new location
4. Connect the DC output extension from the fixture to the open end of the DC output cord

Eyelet
Input Fixture Driver
DC Output Extension (Sold Separately)

Ratchet Hanger Wire Hanger Eyelet
6 ft. 120V Power Cord
DC Output Power Cord
5

SET UP X750
1 Unpack, unfold, and place the fixture on a safe and stable area directly below the desired hanging location.
CAUTION: The LED boards have a conformal coating to resist moisture, but are vulnerable to diode damage if handled improperly. Please make sure LED surfaces are protected from abrasion while handling.
2 Locate the driver mounting brackets. Use the flat head screws to attach the brackets to the fixture. Use the round head screws to mount the driver to the brackets. Flat head screw – Bracket to fixture
Round head screw – Driver to bracket

3 Attach the DC output cord from the driver connection marked “Output” to the two connection points on the fixture. Attach the 120v power cord to the driver connection marked “Input.”

Fixture

DC Output Cord

Driver

6 ft. 120V Power Cord

4 Lower the yo-yo ratchet hangers to each metal mounting eyelet found on the top side of the fixture. Raise the light to the desired position. Ratchet Hanger

Eyelet

Eyelet
6

BEST PRACTICES

SPECTRUM ADJUSTMENT
The spectrum and intensity of the light can be manually controlled through the rotary dials on the front of the driver.
Channel 1 is a targeted full spectrum channel and should always be on. Intensity of this channel will vary for clones, seedlings, and younger plants.
Channel 2 contains the IR and UV, as well as some additional deep reds, for an enhanced flowering spectrum.
Please see the chart for recommended intensity levels.

X Series Driver (front)

OUTPUT

Full Spectrum

0% 25% 50%

Cluster

Dimming

75%

100%

Red + IR + UV

0% 25% 50%

Cluster

Dimming

75%

100%

Cluster Dimming Control

GERMINATION/SEEDLING VEG WEEK 1 VEG WEEK 2 VEG WEEK 3+
FLOWER WEEK 1 FLOWER WEEK 2 FLOWER WEEK 3

FULL SPECTRUM 25%

RED IR/UV 0%

50%

75%

100%

100% 100% 100%

25% 50% 75%

FLOWER WEEK 4+

100%

BEST PRACTICES
ENVIRONMENT
When using the Kind LED X Series, ideal grow room temperature should be 80-85°F. Temperatures lower than the recommended range can slow transpiration, stunting growth. Temperatures higher than the recommended range can cause heat stress to the plant.
NOTE: High PPFD growing conditions require high levels of attention to detail including proper feeding and CO2 augmentation. For more information, please visit kindledgrowlights.com
RECOMMENDED HANGING HEIGHT
The Kind LED X Series designed to excel in close proximity environments but can be used in a variety of applications.
In most applications, a recommended hang height of 12″-18″ above canopy is ideal.
For applications that require less intensity, such as Seedling, Cloning, and Early Vegetative Stages, a hang height greater than 18″ above canopy may be suitable.
*ADVANCED GROWING PRACTICES
For growing practices that include CO2 augmentation, expert attention to feeding practices and nutrient levels, and a rigid adherence to environmental factors, a minimum hang height of 6″-12″ can be achieved. This hang height represents highly elevated PPFD intensity levels and requires care across all elements of the growing process.

Distance To Canopy

6″-12″ Advanced Growing Practices*
12″-18″ Recommended
18″-24″ Seedlings, Clones &
Early Vegetation

YOU’RE READY TO GROW STRONG
For more information on this fixture and all available options, contact a Kind LED Grow Lights customer service representative at kindledgrowlights.com or call (855) 448-4769.
WE WANT TO SEE YOUR GROW! FOLLOW & TAG US ON INSTAGRAM: @kindledgrowlights #kindledgrowlights
LEARN MORE ABOUT THIS LIGHT & OTHER PRODUCTS: kindledgrowlights.com

FCC COMPLIANCE STATEMENT The Kind LED X Series lighting system has been tested at FCC-certified laboratories in the United States and conforms to FCC’s Part 15B Consumer Standard for Industrial, Scientific, and Medical Equipment for both conducted and radiated emissions.
Given that all electronic equipment emits some RF energy, please note that compliance with these standards does not mean a zero level of emission, only very low levels.
Per FCC requirement: This product may cause interference to radio equipment and should not be installed near Maritime safety communications equipment or other critical navigation or communication equipment between 0.45-30 MHz. This device complies with Part 15B of the FCC Rules.
Changes or modifications not expressly approved by Kind LED could void the user’s authority to operate the equipment.
Please visit www.KindLEDGrowLights.com for a complete documentation of the Kind LED Lighting Terms of Use. Thank You.

CAUTION
HIGH INTENSITY LED GROW LIGHT

·THIS LED EMITS INTENSE UV LIGHT
·DO NOT LOOK DIRECTLY AT LIGHT WHILE ON
·WEAR PROPER EYE PROTECTION WHEN LIGHT IS OPERATIONAL
·KEEP OBJECTS FROM COMING INTO CONTACT WITH THE SURFACE OF THE LIGHT