AS200 Pylon Tattoo Arm Rest
Product Information
The product is a tattoo armrest with a tripod stand. It has two
knobs, Knob A and Knob B, which adjust the angle and height of the
arm pad respectively. The tripod stand also has a foot support that
can be extended upwards in the direction of the arrow. The arm pad
can be removed or attached to the tripod stand using Knob A. The
product is manufactured by TATSoul and their contact number is
1.888.828.7685.
Product Usage Instructions
- Adjusting the Arm Pad Angle: Locate Knob A on
the side of the bag as shown in the photo. Tighten the knob to hold
the arm rest in place at the desired angle. - Removing or Attaching Arm Pad to Tripod: Use
Knob A to remove or attach the arm pad to the tripod stand. - Adjusting Height of Tripod: Use Knob B to
adjust the height of the tripod stand according to your
preference. - Extending Foot Support: To extend the foot
support, push it upward in the direction of the arrow.
Vinyl Aftercare Instructions
- Use Soft Cleaning Implements: Only use soft
sponges, dish cloths, and soft-bristled brushes to clean the vinyl
seats. Avoid using steel wool, sharp cleaning tools, or similarly
abrasive cleaning implements as they could cause the vinyl seating
to tear. - Wash with Soapy Water: Mix a small amount of
mild dish soap with warm water until the mixture is sudsy. Dip a
soft-bristled brush or soft cloth in the water and scrub the vinyl
seats until clean. - Avoid Abrasive Cleaning Compounds: Do not use
undiluted bleach or cleaning compounds containing concentrated
detergents, silicone oils, waxes, petroleum distillates, dry
cleaning fluids, solvents, or acid-based cleaners. Using these
compounds over time could cause the vinyl seats to break down.
1.888.828.7685 www.tatsoul.com
Knob A
Knob B
Foot Support
Knob A 1)Adjusts the arm pad angle. Tighten the knob to hold arm rest in place. 2)Removes or attaches arm pad to tripod. Knob B adjusts height of tripod. Extend foot support upward in the direction of the arrow. Note: Knob A is in the side of the bag as shown in the photo.
VINYL AFTERCARE
1.Use soft cleaning implements. Only clean your vinyl seats with soft sponges, dish cloths, and soft-bristled brushes. This will ensure your vinyl seats last for many years. Using steel wool, sharp cleaning tools, or similarly abrasive cleaning implements could cause your vinyl seating to tear.
2. Wash your vinyl with soapy water. Mix a small amount of mild dish soap with warm water until the mixture is sudsy. Dip a soft-bristled brush or soft cloth in the water. Scrub the vinyl seats until clean.
3. Do not use abrasive cleaning compounds. Undiluted bleach, for instance, is too caustic to use on vinyl. Over time, cleaning your vinyl seats with bleach will cause them to break down.[6] Likewise, avoid cleaning compounds containing:[7] concentrated detergents silicone oils waxes petroleum distillates dry cleaning fluids solvents acid-based cleaners
TATSoul - Tattoo Supplies & Furniture
