Digiview 7143-26gy Set In Stone Fast Wireless Charging Pad Instruction Manual

DIGIVIEW 7143-26GY Set in Stone fast Wireless Charging Pad

Instruction ManualFunctions:

• Wireless Charging Surface
• LED Indicator
• USB cable

What’s included:

• 1 x Wireless Charging Pad
• 1 x Instruction Manual

TECH SPECIFICATIONS

• Input: 5V/2A;9V/1.5A
• Wireless Output: 5W/7.5W/10W

Instructions:

1. Wireless Charging Mobile phones and other electronic devices:
   • Connect the USB cable of the charging pad to a power source. LED indicator (2) will glow RED when the device is in wireless charging standby.
   • Place the wireless charging supported mobile device on the wireless charging surface(1), LED will glow BLUE when device is charging.
   • The phone will begin to charge automatically. Once fully charged remove the device. Note: When wireless charging, be sure there is no object between the device and charging surface that would interfere with the charging process.
   • To achieve fast wireless charging, a quick charger AC adapter is required.

SAFETY PRECAUTIONS:

WARNING-When using this product, basic precautions should always be followed:

1. Read all the instructions before use.
2. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
3. Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
4. To reduce the risk of injury, close supervision is required when the product is used near children.
5. Do not expose the device to moisture.
6. Do not use the device in excess of its output rating. Overload outputs above the rating my result in a risk of fire or injury.
7. Do not use the device if damaged or MODIFIED.
8. Do not disassemble the device. For professional. incorrect reassembly may result in a risk of fire or injury.
9. Do not expose the device to fire or temperatures above 104°F may cause an explosion.
10. Ensure that qualified service professionals use only identical replacement parts to
    ensure product safety.
11. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating.
12. Please remove any attachments from the phone before charging on this device, attachments can interfere with wireless charging and lead to overheating.
13. This product is made from cement. If drop, it may crack. Please handle it with care.

FCC