Foreskinned Foreskin Restoration Gravity For Air Instructions

Foreskinned Foreskin Restoration Gravity For Air Instructions

Foreskinned Foreskin Restoration 
Gravity for Air Instructions

Foreskinned Foreskin Restoration Gravity for Air Instructions

Disclaimer

These products are not intended for treating any medical conditions. You are solely responsible for how you use them. We are not liable for any damage, embarrassment, or economic losses that may or may not occur while using them. By putting the devices together and/or start using them you forfeit any claims on the company, the owner, employees, or vendors. Once you have received your products, we will not refund you. Parts that are damage upon arrival will be replaced. We reserve the right to judge what constitutes a damaged part.

Parts

Inspect all parts and contact us if any parts are damaged or missing. If you are unsure about parts or their status, please do not hesitate to contact us at the store for further support.

Foreskinned Foreskin Restoration Gravity for Air - Parts

  1. Distance ring (2 pcs)
  2. Adapter
  3. Start weight ~ 200 g (~ 7 oz)

Additional weights you may have orderd include:

Foreskinned Foreskin Restoration Gravity for Air - Additional weights you may have orderd include

4. Extension weight ~ 200 g (~7 oz)
5. End weight ~ 200 g (~7 oz)
6. End weight ~ 300 g (~10,5 oz)

By alternating the end weights and adding extension weights you can gradually add more weight in 100 g (~3,5 oz) increments.

Maintenance

Clean all the parts when you find it appropriate. Do not use any chemicals or other toxic materials. Clean with regular soap and lukewarm water.

Assembly instruction

If you would prefer you can find an instructional video at the store, on how to assemble the device. The image on the left of the page shows the correct orientation of the parts relative to each other.

Foreskinned Foreskin Restoration Gravity for Air - Assembly instruction

Snap it in and you are ready to go!

Foreskinned Foreskin Restoration Gravity for Air - Snap it in and you are ready to go

The above image shows a rendering of how to attach the device and how it should look when attached.

When using the device, do not swing it, start light and gradually work your way up to your desired weight. If dropped, the steel weights can cause injury and or damage to your floor. Therefore, it is utmost important that you make sure that they cannot unscrew during usage. A good tightening is usually sufficient, but you can also use a piece of tape to make sure that they do not unscrew. Do not continue to use the device if you feel any pain. Immediately contact your doctor if you believe that you have suffered any injuries while using the products.

 

Thank you for purchasing our products!

 

Revision: 1.5
Last updated: 2021-02-27

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals