Bicycle Glass 767 Semi Flush Light Instruction Manual (+ PDF)

Contents hide

2 Product Information: Semi-Flush Assembly and Wiring Instructions

767 Semi Flush Light

Product Information: Semi-Flush Assembly and Wiring
Instructions

The Bicycle Glass Co. Semi-Flush Assembly and Wiring
Instructions are designed to guide users on how to install and wire
the hardware. The instructions are subject to revision, and the
hardware is meant to install into a standard ceiling electrical
box/junction box. The hardware comes with a parts list that
includes a canopy plate, mounting strap, canopy screws, mounting
screws, wire connectors, socket set, shade ring, and glass shade.
The wire designation chart identifies the physical description and
electrical designation of the wires for brushed nickel, polished
brass, and antique bronze hardware.

Product Usage Instructions:

Before installing the hardware, it is recommended to consult a
certified electrician. Follow these instructions:

Turn OFF power at the breaker box.
Remove the existing light fixture from the ceiling electrical
box.
Remove mounting strap from canopy plate by removing the two
canopy screws from the sides of the canopy plate. Save mounting
strap and canopy screws for later use.
Attach the mounting strap to the ceiling box with tabs facing
downward using the two mounting screws provided. Make sure the
canopy plate can be mounted snug to the ceiling after the mounting
strap is attached to the ceiling electrical box when wiring is
complete.
Connect black wire of the fixture to black wire of the ceiling
electrical box using an orange wire connector provided. See WARNING
#2 and WARNING #3.
Connect white wire of the fixture to white wire of the ceiling
electrical box using an orange wire connector provided. See WARNING
#2.
Connect bare ground wire from mounting strap to green/bare wire
of the ceiling electrical box and green wire from the fixture using
an orange wire connector provided. See WARNING #1 and WARNING
#3.
Carefully arrange any excess wiring and orange wire connectors
within canopy plate and the ceiling electrical box.
Align holes in the side of the canopy plate to the holes at the
ends of the mounting strap while pushing it snug to the ceiling.
Insert the two canopy screws and tighten.
Remove the shade ring from the E26 socket set on the
fixture.

View Fullscreen

SEMI-FLUSH ASSEMBLY AND WIRING INSTRUCTIONS
PLEASE CONSULT A CERTIFIED ELECTRICIAN BEFORE INSTALLING HARDWARE. DRAWINGS ARE NOT TO SCALE AND ARE FOR REFERENCE ONLY. THESE INSTRUCTIONS ARE SUBJECT TO REVISION. THIS HARDWARE IS MEANT TO INSTALL INTO A STANDARD CEILING ELECTRICAL BOX/ JUNCTION BOX.

Bicycle Glass Co. Semi-Flush Assembly and Wiring Instructions
PARTS LIST:

A: Canopy Plate Qty. 1

E: Mounting Strap Qty. 1

B: Canopy Screws 0.375 inches tall, Qty. 2

F: 8-32 Mounting Screws 1.25 inches tall, Qty. 2
I: Orange Wire Connectors Qty. 3

U: E26 Socket Set Qty. 1

V: Shade Ring Qty. 1

W: Glass Shade* Qty. 1

*Illustrated figure is Model 767: 7 inch inside diameter, 5 1/8 inch opening, 6 3/4 inch high. Your selected shade may be different.

Bicycle Glass Co. Semi-Flush Assembly and Wiring Instructions

WIRE DESIGNATION CHART:
BRUSHED NICKEL HARDWARE:

Physical Description

Electrical Designation

Clear Wire with black stripe BLACK/ HOT

Clear Wire with no stripe WHITE/ NEUTRAL

Clear Wire with green stripe

GREEN/ GROUND

BLACK/ POLISHED BRASS/ ANTIQUE BRONZE HARDWARE:

Physical Description
Black Wire with copper lead

Electrical Designation BLACK/ HOT

White Wire with copper lead

WHITE/ NEUTRAL

Green Wire with copper lead

GREEN/ GROUND

Bicycle Glass Co. Semi-Flush Assembly and Wiring Instructions

Instructions:

1. Turn OFF Power at Breaker Box.

2. Remove the Existing Light Fixture from the Ceiling Electrical Box.

3. Remove Mounting Strap (E) from Canopy

Plate (A) by removing the two Canopy Screws

(B) from the sides of the Canopy Plate (A). (Save

Mounting Strap (E) and Canopy Screws (B) for

later use.)

4. Attach the Mounting Strap (E) to the ceiling

box with the tabs facing downward, using the

two 8-32 Mounting Screws (F) provided. Make sure that Canopy Plate (A) can be mounted snug to the ceiling after the Mounting Strap (E)

is attached to the Ceiling Electrical Box when

wiring is complete.

PRO TIP: Take a photo of the existing wiring on your phone to use as reference before removing it.

A. B.

F. 4

Bicycle Glass Co. Semi-Flush Assembly and Wiring Instructions
FROM POWER SOURCE 5.
GREEN OR BARE

WHITE

BLACK

TO LIGHT FIXTURE
5a. Connect BLACK Wire of the fixture to BLACK Wire of the Ceiling Electrical Box using an Orange Wire Connector (I) provided. (See: WARNING #2 and WARNING #3)
5b. Connect the WHITE Wire of the fixture to WHITE Wire of the Ceiling Electrical Box using an Orange Wire Connector (I) provided. (See: WARNING #2)
5c. Connect the BARE Ground Wire from Mounting Strap (E) to the GREEN/BARE Wire of the Ceiling Electrical Box and the GREEN Wire from the fixture, using an Orange Wire Connector (I) provided. (See: WARNING #1 and WARNING #3)

Bicycle Glass Co. Semi-Flush Assembly and Wiring Instructions 7.

U. 9.

B. W.

10. 6

6. Carefully arrange any excess wiring and Orange Wire Connectors (I) within Canopy Plate (A) and the Ceiling Electrical Box.

7. Align holes in the side of the Canopy Plate (A)

to the holes at the ends of the Mounting Strap (E),

while pushing it snug to the ceiling, insert the two

Canopy Screws (B) and tighten.

8. Remove the Shade Ring (V) from the E26 Socket Set (U) on the fixture.

9. Attach the Glass Shade (W) to the E26 Socket Set (U) through the hole at the top of the Glass Shade (W). Use the Shade Ring (V) to tighten the Glass Shade (W) to the hardware.
(See: NOTICE #1 and WARNING #4)

10. Install one medium E26 base light bulb into the E26 Socket Set (U).
(See: WARNING #5)

11. Turn ON Power at Breaker Box to test the fixture.

Bicycle Glass Co. Semi-Flush Assembly and Wiring Instructions
WARNINGS:
WARNING #1: Never connect Ground Wire (GREEN or BARE) to WHITE/Neutral or BLACK/Hot Wire. WARNING #2: Never connect the BLACK/Hot Wire to WHITE/Neutral Wire. WARNING #3: Orange Wire Connectors (I) provided are designed to connect TWO to FOUR 18-gage wires and may be appropriate for your wiring situation. All wiring should be snugly and securely fastened with correctly sized wire connectors. If your wiring differs from this most simple example, you should consult a qualified electrician to be sure that the wiring is done safely and correctly with appropriate sized connectors for your unique wiring situation. WARNING #4: Do NOT over tighten the Shade Ring (V) as the Glass Shade (W) may crack or break. WARNING #5: The hardware has a 60-watt INCANDESCENT MAX rating. Do NOT exceed this rating. For California residents it is recommend to not go beyond a 10-watt LED MAX rating. NOTICE #1: Brushed Nickel fixtures come with clear cord. The clear cord comes with distinct heat shrink colored labels instead of fully colored wires. Other finishes come with either black or brown cord and the individual wires are BLACK/Hot, WHITE/Neutral and GREEN/Ground. (SEE: `WIRE DESIGNATION’ CHART AT THE BEGINNING OF INSTRUCTIONS). NOTICE #2: Make sure power is OFF before attempting to adjust the Glass Shade (W). The flange of the Shade Ring (V) (wide and flat side of the ring) screws around the E26 Socket Set (U) against the Glass Shade (W) to affix it to the lighting fixture. The hole at the top of the shade is slightly larger than the E26 Socket Set (U). If the shade hangs slightly crooked then hold Glass Shade (W) while unscrewing the Shade Ring (V) a few turns. Once the Glass Shade (W) is loose, recenter the Glass Shade (W) to hang straight and then re-tighten the Shade Ring (V) to set Glass Shade (W) in place.