APW3201KH Pressure Washer
Product Information:
The product is a pressure washer that is designed to clean surfaces
such as cars, decks, patios, driveways, and more. It comes with a
handle, gun holder, frame, hose holder, pressure hose, wand,
nozzle, and quick connect. The product also includes a Turbo nozzle
which has 7 different spray patterns to cater to different cleaning
needs. It is important to read the user manual carefully before
using the product to avoid any potential safety hazards.
Product Usage Instructions:
- Install the handle by attaching it to the frame with the knob
button and tighten it. - Attach the gun holder to the handle and tighten it.
- Fix the hose holder to the panel.
- Connect the pressure hose to the spray gun and tighten the nut
firmly by hand. - Connect the wand to the spray gun.
- Attach the nozzle to the wand via quick connect.
- Make sure the engine is cold and place the lever in choke
position. If the engine is warm, place the lever in full
throttle/RUN position. - Turn on the water supply.
- Lock the gun trigger by placing the lever in OFF position.
- Use the Turbo nozzle or any other nozzle of your choice to
clean surfaces. - Turn off the water supply when you are done cleaning.
If you have any questions or concerns regarding the product or
its usage, you can call 1-855-888-3598 or email
[email protected] for assistance.
Pressure Washer Quick Start Guide APW3201KH Guide de Démarrage Rapide du Nettoyeur Haute Pression
READ AND FOLLOW OWNER’S MANUAL PRIOR TO USE / LIRE ET SUIVRE LE MANUEL DE L’UTILISATEUR AVANT UTILISATION PRIOR TO STARTING / AVANT LE DÉMARRAGE
Install the handle, tighten the
Attach the gun holder to
handle and frame with the knob the handle
/ Montage de la poignée, serrage / Attachez le clip à la
de la poignée et du cadre avec le poignée
bouton
Attach the hose holder to the panel / Fixez le support de tuyau au panneau
Connect pressure hose to pump / Connectez le tuyau de pression à la pompe
Connect the pressure Hose to the spray gun and tighten the nut firmly by hand.
/ Connectez le tuyau de pression au pistolet de pulvérisation et serrez fermement l’écrou à la main
Wand /Baguette magique
Spray gun /Pistolets aé rographes
Connect wand to spray gun
/ Connectez le barre de pulvérisation au pistolet pulvérisateur
Nozzle /Buses
Quick connect
/Connexion rapide
Wand/Baguette
Attach nozzle to wand via quick connect
Fixez la buse au barre de pulvérisation par une connexion rapide
Connect to water source & turn ON / Connecté à la source d’eau et ouvert
SOAP
6S5O°AP
STARTING / DÉMARRAGE
STOP
Choke position / Position du starter STOPPING / ARRÊT
1A
STOP
1B
Full throttle/RUN position / Plein gaz/position rapide
1A. Cold engine: Place lever in choke position. / Moteurs froids: Placer le levier en position starter. 1B. Warm engine: Place lever in full throttle/RUN position. / Moteur chaud: Placez le levier en position plein gaz / RUN.
2. Pull starter handle repeatedly until engine starts. / Tirer à plusieurs reprises la poignée du démarreur jusqu’à ce que le
moteur démarre.
25°
45°
Turbo nozzle/ 7 in 1 nozzle/ Buse de turbine 7 en 1 buse
15°
0°
LINE
Failure to read and follow instruction in manual(s) could result in death,bodily injury, and/or property damage.
STOP
Le défaut de lire et de suivre les instructions du manuel peut entraîner la mort, des blessures corporelles et / ou des dommages matériels.
Lock gun trigger / Trigger de Place lever in OFF position
pistolet de verrouillage
/ Placer le levier en position OFF
Turn water supply OFF / Transformer l’alimentation
en eau OFF
Release pressure / Relâcher la pression
Questions? Call 1-855-888-3598 or email [email protected]
Des questions? Téléphoner au 1-855-888-3598 ou envoyer un courriel à [email protected]
32009-00807-01
Domain Names and Web Hosting by IPOWER
