PITTSBURGH 57000 Automotive Racing 2 Ton Aluminum Jack Low Profile
Instructions
Follow these instructions before operating:
- Turn handle counterclockwise to open release valve.
- Remove four screws holding on pump cover.
- Remove oil fill plug and top off hydraulic oil.
- Apply pressure to saddle and quickly pump handle several times.
- Check oil fill hole again and top off with hydraulic oil if necessary.
- Replace the oil fill plug and turn handle clockwise to close release valve.
- Test several times for proper operation before attempting to lift a load.
For Questions, Please Call or e-mail our technical support 1-888-866-5797.
[email protected]
