Tuya S3(wt) 3 In1 Wi-fi And Rf High Voltage Smart Led Controller User Manual

S3(WT) 3 In1 Wi-Fi and RF High Voltage Smart LED Controller

WiFi & RF 3 Channel High Voltage LED Strip Controller Model No.: S3(WT)

Features
3 channel high voltage LED strip controller, can control maximum about 50 meters of high voltage LED strip, different LED strip may have difference.
3 in 1 function, used for control RGB, color temperature or single color LED strip. Tuya APP cloud control, support on/off, RGB color, color temperature and brightness adjust,
delay turn on/off light, timer run, scene edit and music play function. Voice control, support amazon ECHO and TmallGenie smart speaker. Match with RF 2.4G remote control optional. User need set light type by press key before Tuya APP network connection
and match RF remote of the same light type. Each S3(WT) controller can also work as WiFi-RF converter, then use Tuya APP
to control one or more RF LED controller or RF LED dimming driver synchronously. Light on/off fade time 3s selectable. Connect with external push key to achieve on/off and 0-100% dimming function.

Technical Parameters

Input and Output Input voltage Input current Output voltage Output current Output power

100-240VAC 3.2A 3 x (100-240)VDC 3CH,1A/CH 3 x (100-240)W

Environment Operation temperature Case temperature (Max.)

Ta: -30 OC ~ +55 OC Ta: +85 OC

Safety and EMC
EMC standard (EMC)
Safety standard(LVD) Radio Equipment(RED) Certi cation Warranty Warranty

Dimming data

ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4

Input signal Dimming gray scale

EN 62368-1:2020+A11:2020 Dimming range

ETSI EN 300 328 V2.2.2

PWM Frequency

CE,EMC,LVD,RED

Package

5 years

Size Gross weight

LVD RED
Tuya APP + RF 2.4GHz + Push Dim 4096 (2^12) levels 0 -100% 2kHz
L178x W150 x H38mm 0.136kg

Mechanical Structures and Installations

LED indicator

Match key

MATCH

+++

AC Push switch

OUTPUT W1 W2 W3 WW CW NC R GB

100-240VAC Push Switch
A2 A1

INPUT 100-240VAC
L N

Systemwiring

3G/4G/5G WiFi

Tuya Cloud

Output CH3/Blue LED Output CH2/Green LED Output CH1/Red LED Output LED + Installation rack
AC N input AC L input

45mm

175mm
160mm 27mm

WiFi

15m

Mobile Phone

WiFi Router

S3(WT)

30m

DIM

RFDIM Controller

DIM

Amazon ECHO 30m

30m

RFRemote(Optional)

S3(WT)

CCT

RFCCT Controller

CCT

SCENE SCENE SCENE SCENE

POWER MODE BRT/SPEED WHITE

30m

S3(WT)

30m

RGB

RFRGB Controller

RGB

Note:

PanelRFRemote(Optional)

1.Theabove distance is measured in spacious(noobstacle) environment, Please refer to the actual test distance before installation.

2.PleasecheckiftheWiFi routernetin2.4Gband, the5Gband isnotavailable, and donothideyourrouternetwork.

3. PleasekeepthedistancebetweenS3(WT) devicesandrouterclose, andchecktheWiFisignals.

Wired connection Wireless connection

User Manual Ver 1.0.0

1

Wiring Diagram
S3(WT) for RGB
N

100-240VAC Push Switch
A2 A1

INPUT 100-240VAC
L N

OUTPUT W1 W2 W3 WW CW NC R GB

Caution: This controller apply for high voltage LED strip, please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller or high voltage LED strip will be damaged.
High voltage RGB LED strip
MATCH
+++
N AC100-240V

Push Switch Press and hold match/set key for 12s, until the RUN LED indicator turn red, then release, the controller will become RGB type, then do smart con g by tuya APP, or short press match key to match with RGB RF remote.

S3(WT) for dual color
MATCH
N

100-240VAC Push Switch
A2 A1

INPUT 100-240VAC
L N

OUTPUT W1 W2 W3 WW CW NC R GB

High voltage dual color LED strip
CW
+++
N
AC100-240V

Push Switch Press and hold match/set key for 10s, until the RUN LED indicator turn yellow, then release, the controller will become CCT type, then do smart con g by tuya APP, or short press match key to match with CCT RF remote.

S3(WT) for single color
MATCH
N

100-240VAC Push Switch
A2 A1

INPUT 100-240VAC
L N

OUTPUT W1 W2 W3 WW CW NC R GB

High voltage single color LED strip

High voltage single color LED strip

+++

N

High voltage single color LED strip

AC100-240V

Push Switch
Press and hold match/set key for 8s, until the RUN LED indicator turn white, then release, the controller will become DIM type, then do smart con g by tuya APP, or short press match key to match with dimming RF remote.
Note: 1. Press and hold Match/Set key for 2s, switch 3 kinds light type in sequence. 2. For CCT light type, continuous power on and off will change 3 levels color temperature (WW, NW and CW) in sequence. 3. Switch off the power, then switch on power, repeat again. Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s.

AC Push Dim Function (Optional)
Short press: Turn on or off light. Long press (1-6s): Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction. Dimming memory: Light returns to the previous dimming level when switched off and on again, even at power failure.

User Manual Ver 1.0.0

2

Tuya APP network connection
Push twice Match/Set key fastly, or when press and hold Match/Set key for 8-12s to set 3 kinds light type: Clear previous network connection, enter Smart config mode, the purple LED indicator flash fastly, the output LED will flash 10 times.
Press and hold Match/Set key for 2s: Switch 3 kinds light type in sequence, notice this operation does not automatically clear previous network connection.
Press and hold Match key for 5s: Clear previous network connection, enter AP config mode, the purple LED indicator flash slowly. If smart config failed, please try AP config.
Repeat power on and off for 5 consecutive times, also clear previous network connection, enter Smart config mode, the output LED will flash 10 times.
If Tuya APP network connection succeed, the purple LED indicator will stop flash, and in Tuya APP, you can find RGB device (or other DIM, CCT).

Tuya APP interface

DIM

CCT

RGB

White interface For DIM type: Touch brightness slide to adjust brightness. For RGB type: Touch brightness slide, get RGB mixed white firstly, then to adjust white brightness.
RGB

Color temperature interface For CCT type: Touch color wheel to adjust color temperature. Touch brightness slide to adjust brightness.
RGB

Colour interface
For RGB type: Touch color wheel to adjust static RGB color. Touch brightness slide to adjust color brightness. Touch saturation slide to adjust color saturation, namely gradient from the current color to white(RGB mixed).

Scene interface
The 1-4 scene is static color for all light type. the inner color of these scene can be editable. The 5-8 scene is dynamic mode for RGB type, such as green fade in and fade out, RGB jump, 6 color jump, 6 color smooth.

Music, Timer, Schedule
The music play can use smart phone music player or micro-phone as music signal input. The Timer key can turn on or turn off light in the next 24 hours. The Schedule key can add multiple timers to turn on or turn off light according to different time periods.

User Manual Ver 1.0.0

3

S3(WT) match remote control (Optional)
End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the S3(WT)’s Match key
Match: Short press match key of S3(WT), immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful.

Use Power Restart
Match: Switch off the power of S3(WT), then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete: Press and hold match key of S3(WT) for 10s, The LED indicator fast flash a few times means all matched remotes were deleted.

Delete: Switch off the power of S3(WT), then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

S3(WT) work as WiFi-RF converter to match RF LED controller or dimming driver
End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Use Power Restart

Match: Short press match key of the controller, immediately press on/off key on the Tuya APP. The LED indicator fast flash a few times means match is successful.

Match: Switch off the power of the controller, then switch on power, repeat again. Immediately short press on/off key 3 times on the Tuya APP. The light blinks 3 times means match is successful.

Delete: Press and hold match key of the controller for 5s, The LED indicator fast flash a few times means match was deleted.

Delete: Switch off the power of the controller, then switch on power, repeat again. Immediately short press on/off key 5 times on the Tuya APP. The light blinks 5 times means match was deleted.

RGB dynamic mode list

No.

Name

No.

1 RGB jump

6

2 RGB smooth

7

3 6 color jump

8

4 6 color smooth

9

5 Yellow cyan purple smooth 10

Name RGB fade in and out Red fade in and out Green fade in and out Blue fade in and out White fade in and out

User Manual Ver 1.0.0

4