
CLEANVIEW® Vacuum USER GUIDE 1330, 1331, 1334 SERIES
|

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.
Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance. When using an electrical appliance, basic precautions should be observed, including the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
» Always connect to a polarized outlet (one slot is wider than the other). Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
» Do not leave vacuum cleaner when it is plugged in. Unplug from outlet when not in use and before servicing.
» Do not use outdoors or on wet surfaces.
» Do not allow to be used as a toy. Close attention is necessary when used by or near children.
» Do not use for any purpose other than described in this User’s Guide. Use only the manufacturer’s recommended attachments.
» Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
» Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep the cord away from heated surfaces.
» Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
» Do not handle plug or vacuum cleaner with wet hands.
» Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce airflow.
» Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
» Turn off all controls before plugging or unplugging vacuum cleaner.
» Use extra care when cleaning on stairs.
» Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
» Do not use vacuum cleaner in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
» Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).
» Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
» Do not use without filters in place.
» Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
» Use only on dry, indoor surfaces.
» Keep appliance on a level surface.
» Do not carry the vacuum cleaner while it is running.
» Unplug before connecting or disconnecting the TurboBrush® Tool.
SAVE THESE INSTRUCTIONS
This model is for household use only.
| |
THIS APPLIANCE HAS A POLARIZED PLUG |
|
Thanks for buying a BISSELL vacuum!
We love to clean and we’re excited to share one of our innovative products with you. This guide has important instructions on how your new vacuum works, including using (page 11), maintaining (pages 14-17), and if there is a problem, troubleshooting (page 18).
In just a few simple assembly steps, you’ll be ready to vacuum. Flip to page 5 and let’s get started! What’s In The Box?

Product View
|

NOTE: The Crevice Tool is stored inside the Extension Wand.
Assembly 

NOTE: The power foot will not suction properly unless the hose is firmly attached.
Operations: Power On & Settings

|
NOTE: Certain carpets and low humidity conditions may generate small static discharges. Static discharges are entirely harmless and are not associated in any way with the main power supply.
Maintenance: Clean Dirt Tank 
|

NOTE: The dirt tank may be washed in warm water with a mild detergent. Make sure it is completely dry before replacing.
Pre-Motor Filter 
| Do not operate vacuum with damp or wet filters or without all filters in place. |

Post-Motor Filter

NOTE: The pleated post-motor filter may NOT be washed with water or detergent. Replace the post-motor filter every 3 to 6 months.

NOTE: If an object becomes lodged in foot and brush shuts off, turn vacuum off and unplug from electrical outlet. Remove obstruction and brush will automatically reset when vacuum is plugged and turned back on.
TurboBrush® & TurboEraser® Tool

Troubleshooting 
| ||
Problem | Possible causes | Remedies |
Vacuum won’t turn on | Power cord not plugged in | Check electrical plug |
Blown fuse/tripped breaker | Check/replace fuse or reset breaker | |
Vacuum won’t pick up dirt | Incorrect height adjustment | Adjust powerfoot to correct height setting |
Hose not attached to suction opening | Grasp the hose wand and firmly push into the hose wand base | |
Crack or hole in hose | Check hose and replace if needed | |
Broken or worn drive belt | Replace drive belt, see page 9 | |
Rotating floor brush bristles worn | Replace brush | |
Rotating floor brush jammed | Remove brush and clean debris from brush ends, see page 9 | |
Clog in vacuum | Check for debris build-up or clogs in inner tank, where tank connects to hose, and where hose connects to base. See online video for more help. | |
Dirt tank full | Empty dirt tank | |
Dirt tank or upper tank not installed properly | Position correctly and lock in place | |
Filters are dirty | Check and clean or replace pre-motor and post-motor filters, see page 10 & 11 | |
Tool won’t pick up | Crack or hole in hose | Check hose and replace if needed |
Clog in vacuum | Check for debris build-up or clogs in inner tank, where tank connects to hose, and where hose connects to base. See online video for more help. | |
Dirt tank full | Empty dirt tank | |
Dirt tank or upper tank not installed properly | Position correctly and lock in place | |
Filters are dirty | Check and clean or replace pre-motor and post-motor filters, see page 8 | |
Vacuum difficult to push | Incorrect height adjustment | Adjust powerfoot to correct height setting |
Visible dirt escaping from vacuum | Dirt tank full | Empty dirt tank |
Filters missing or installed incorrectly | Check pre-motor and post-motor filters for correct installation | |
Warranty
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail as described below.
Limited Two-Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for two years any defective or malfunctioning part.
See information below on “If your BISSELL product should require service”.
This warranty applies to products used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User’s Guide is not covered.
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE TWO YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you. NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.
Service
If your BISSELL product should require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.
Website: www.BISSELL.com
E-mail: www.BISSELL.com/email-us | Call: BISSELL Consumer Care 1-800-237-7691 Monday – Friday 8am – 10pm ET Saturday 9am – 8pm ET Sunday 10am – 7pm ET |
Please do not return this product to the store.
Other maintenance or service not included in the manual should be performed by an authorized service representative.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
Register your product today!
Registering is quick, easy and offers you benefits over the lifetime of your product.
You’ll receive:
BISSELL Rewards Points
Automatically earn points for discounts and free shipping on future purchases.
Faster Service
Supplying your information now saves you time should you need to contact us with questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips and more!
Visit www.BISSELL.com/registration now!
Visit us online at BISSELL.com |
We can’t wait to hear from you!
We really do read your comments, tweets, and posts.
Rate this product on BISSELL.com
Parts & Supplies For Parts and Supplies, go to BISSELL.com and enter your model number in the search field. |

Bissell 1330, 1331, 1334 Series Cleanview Vacuum User Guide – Download [optimized]
Bissell 1330, 1331, 1334 Series Cleanview Vacuum User Guide – Download




















