How To Attach Fitbit To Charger

Clip the end of the charging cable to the port on the back of the tracker. The pins on the charging cable must lock securely with the port. The connection is secure when the tracker vibrates and a battery icon appears on the screen.

Hold the end of the charging cable near the port on the back of the tracker until it attaches magnetically. Make sure the pins on the charging cable align with the port. The connection is secure when the tracker vibrates and a battery icon appears on the screen.

1. Remove the device from the band by gently pushing the screen until it detaches from the frame.
2. Put the device inside the charging cradle with the screen facing you and the 4 gold prongs aligned.
   
3. Close the cradle cover. A battery icon appears for a few seconds.
   

While your device charges, a battery icon in the top left of the screen shows the progress.

Clip the end of the charging cable to the port on the back of your tracker. The pins on the charging clip must lock securely with the gold contacts on the back of the tracker. Your tracker vibrates, and a battery icon appears on the screen.

Note: The Charge 3 charging cable doesn’t work with Charge 4. Use the charging cable that came with your Fitbit device. The Charge 4 charging cable has a gray connector on the base of the clip.

Press the tracker into the compartment on the charging cable. The pins on the charging cable must lock securely with the corresponding pins on the back of the device. The connection is secure when the tracker vibrates and the indicator lights blink.

Plug the micro-USB 2.0 charging cable into Flyer’s charging port, located underneath the cover. Note: Flyer can’t be used while charging.

1. Align the pins on the end of the charging cable with the gold contacts on the back of Inspire 2.
2. Gently press Inspire 2 into the charger until it snaps into place.

To remove Inspire 2 from the charging cable:

Hold Inspire 2 and slide your thumb nail between the charger and the back of the tracker on one of the corners. Gently press down on the charger until it separates from the tracker.

1. Hold the end of the charging cable near the port on the back of the watch until it attaches magnetically.
2. Make sure the pins on the charging cable lock securely with the port. The percent charged appears on the screen.
   

Hold the end of the charging cable near the port on the back of the watch until it attaches magnetically. The percent charged appears on screen.

Pinch the clip and place your watch in the charging cradle. The pins on the charging cradle must align with the gold contacts on the back of the watch. The percent charged appears on the screen.

Note: The Versa 2 charging cable doesn’t work with Versa or Versa LE. Use the charging cable that came with your Fitbit device.