Hama 00201646 12w Usb-a Charger Instruction Manual

hama 00201646 12W USB-A Charger Instruction

Operating instruction

Thank you for choosing this Hama product! Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference.

Explanation of warning symbols and notes

• Risk of electric shock This indicates arisk of electric shock from touching uninsulated product parts that may carry hazardous voltage.
• Warning This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
• Note This symbol is used to indicate additional information or important notes.

Package contents

• charger
• these operating instructions

Safety instructions

• Protect the product from dirt, moistureand overheating and use it in dry rooms only.
• Do not drop the product and do not expose it to any major shocks.
• Don’t operate the product outside the power limits specified in the technical data.
• Don’t modify the device in any way.Doing so voids the warranty.
• Do not continue to operate the product if it is visibly damaged.
• Use the product only for the intended purpose.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Route all cables so thereisnorisk of tripping.
• Donot bend or crush the cable.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• The product is intended only for use inside buildings.
• Only use the article under moderate climatic conditions.
• Don’t use the product in areas in which electronic products arenot permitted.
• Do not use the product in a damp environment and avoid splashing water.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter,the adapter cable or the mains cable are damaged.
• Don’t attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Operation

Note -mains voltage 100 -240 V The charger is suitable for mains voltages of 100 -240 Vand thereforecan be used worldwide. Please note that acountry-specificadapter may be necessary.

Warning -connecting devices

• Before connecting device, check whether it can be adequately supplied with the charger’s current capacity.
• Ensure that the power of the connected device does not exceed 20 W.
• Note the instructions in your device’s operating manual.
  Note -Power Delivery /QC3.0, 2.0
• Plug &GO: no additional software is required, simply plug in and start: Thanks to Power Delivery /QC3.0, 2.0, the voltage and power are adjusted automatically.
• Be aware that, for efficient and optimized charging, your terminal device must support the PD (Power Delivery) /QC3.0, 2.0 function.
• If you have a large number of PD/QC-enabled devices with different firmware updates, it may be that the function is not fully supported.

Warning

• Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cordfromthe socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power. Unless different instructions have been expressly given in the operating instructions for the devices you arecharging, proceed as follows:
• Connect your device to a USB charging socket using a suitable USB cable.
• Connect the charger to a properly installed and easily accessible mains socket.
• The charging process is displayed on your device.
• Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
• Then disconnect the charger from the line connection.
• When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.

Care and maintenance
Only use soft, dry towels to clean the product.

Note Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Technical data

Warranty disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

References

• hama.com