RALLY INNOVATIONS FO-R9F-SKP-01 2021+ Bronco Sport
- Make: Ford
- Model: 2021+ Bronco Sport (Badlands & First Edition)
- Application: Skid Plate
| PACKAGE CONTENTS | TOOLS | |||||
| QTY | QTY | QTY | 12mm Wrench/Socket 13mm Wrench/Socket | |||
| 1 4 4 | Skid Plate M8 x 40mm Flange Head Bolt Round Spacer | |||||
INSTALLATION INSTRUCTIONS
- Locate and remove the (4) M8 Hex Head bolts shown above which are fastened to the factory skid plate. They will be replaced with the included longer M8 Flange Head bolts later.
- Place the included round spacers over each mounting hole on top side of the new skid plate.
- Carefully raise the plate against the vehicle, aligning the holes with the holes on the vehicle. Ensure the spacers are properly aligned so that each new M8x40mm Flange Head bolt inserts through them and into the vehicle.
- Completed assembly.
DISCLAIMER FOR RALLY INNOVATIONS PRODUCTS
Buyers assume all risk and liability whatsoever for the installation and use of Rally Innovations products. Rally Innovations products are sold as decorative accessories and should not be relied upon as protection for the vehicle or occupants in the event of a collision or rollover. Vehicles equipped with a supplemental restraint system (air bag) deployed by impact should not be modified by any aftermarket Light Bar or Skid Guard without first consulting the vehicle manufacturer. Rally Innovations, a subsidiary of Pentec Automotive assumes no liability for injury, loss, or incidental or consequential damages in the event of a collision or rollover.
