Bite Keeper Smart Bite Alarm Set
Product Information
The product is a device that allows for the charging of up to 5
units simultaneously. It requires a 5.0V (no more than 5.0V) +3.0A
plug for safe and sufficient charging of all 5 units at the same
time. If the specification of the plug does not meet the
requirements, it may only charge 2-3 units simultaneously.
The product also includes a receiver and paired alarms that can
be silenced for approximately 30 seconds by short pressing the
Power Button of the receiver. After the 30 seconds of silence, all
devices will automatically switch back to the previous working
mode.
Product Usage Instructions
- Ensure that the charging plug meets the specifications required
for charging up to 5 units simultaneously. - Connect up to 5 units that need to be charged to the
device. - Plug in the device to a power source using the charging
plug. - Wait for all devices to charge fully before removing them from
the device. - Pair the alarms with the receiver according to the instructions
provided. - Short press the Power Button on the receiver to silence both
the receiver and the paired alarms for approximately 30
seconds. - After 30 seconds, all devices will automatically switch back to
the previous working mode.
www.rippton.com
Updated on 23/05/2023 (Ver7)
Warning: 5.0V (no more than 5.0V)+3.0A plug is required for safe and sufficient charging 5 units at the same me. If the specificaon of your plug can not meet the requirements, it may only charge 2-3 units simultaneously.
New tip
After successfully pairing alarms with the receiver, short pressing the Power Button of the receiver will silence both the receiver and the paired alarms for about 30 seconds. After 30 seconds for silence, all devices will automatically switch back to the previous working mode.

















