Triumph HD 10×42 Binocular
Product Information:
The product is a binocular with the following
specifications:
- Magnification
- Objective Lens Diameter
- Linear Field of View (@1000 Yards)
- Angular Field of View
- Close Focus
- Eye Relief
- Interpupillary Distance
- Diopter Range
- Prism Type
- Prism Material
- Height
- Width
- Weight
Product Usage Instructions:
Adjusting the Eyecups:
1. When not using glasses, fully extend the eyecups.
2. When using glasses, fully collapse the eyecups.
Adjusting the Interpupillary Distance:
1. Rotate the binocular barrels inward or outward to line up
your eyes with the ocular lenses.
2. Match the interpupillary distance (IPD) of your eyes to the
binocular so that you see a single image free of edge
distortion.
Focusing the Binocular:
1. Choose an object about 20 yards away from you.
2. Stay in the same spot until you have adjusted the binocular
for your eyes.
3. Follow this two-step process:
– Adjust the center focus to get a clear image of the
object.
– Adjust the diopter to compensate for any difference in vision
between your eyes.
Attaching Accessories:
1. To attach the binocular tether straps:
– Thread the wide end of the binocular tether straps through the
harness strap buckles.
– Size to fit by adjusting the one-size-fits-all harness
strap.
– Thread the binocular tether straps through the strap
attachments on the binocular.
– Thread the binocular tether straps back through the tether
strap buckles to secure.
2. To attach the padded neck strap:
– Push a few inches of the strap through the strap attachment on
the binocular.
– Hold the buckle and thread the end of the strap through the
buckle.
– Adjust the overall length, then pull tight until the strap is
secured within the buckle.
Note: If using another type of strap, never attach metal o-rings
directly onto the strap attachment.
Maintenance:
Cleaning: Use a soft cloth or brush to remove
dirt and debris. For stubborn dried water spots, a small amount of
alcohol can be used.
Lubrication: The binocular components are
permanently lubricated and should not require additional lubricant.
Do not attempt to disassemble any components, as it may void the
warranty.
Storage: Store the binocular in a dry and safe
place when not in use.
Warranty:
The product comes with an unlimited, unconditional, lifetime
warranty. No registration, box, or receipt is required for the
warranty to be honored.
PRODUCT MANUAL
SPECS MAGNIFICATION X OBJECTIVE LENS DIAMETER LINEAR FIELD OF VIEW (@1000 YARDS) ANGULAR FIELD OF VIEW CLOSE FOCUS EYE RELIEF INTERPUPILLARY DISTANCE DIOPTER RANGE PRISM TYPE PRISM MATERIAL HEIGHT WIDTH WEIGHT
10×42 334′ 6.4° 15.3′ 17.0mm 55mm – 75mm ±5.0 Roof BaK-4 6.1″ 5.0″ 22.9 oz.
Triumph® HD
TRIUMPH® HD 10×42 BINOCULAR
Get the binocular with the best image quality, ergonomics, and durability in its class. Water, fog, and shockproof. Fully multi-coated lenses for edge-to-edge sharpness and light transmission you’d expect in binos that cost a lot more. Stow them in your truck, backpack, or go-bag. This rugged, HD optical system delivers adjustable eyecups and a diopter for custom, comfortable viewing. Also ships with useful neck strap and adjustable GlassPakTM harness for fast access and easy carry wherever outdoor adventure takes you.
Ocular Lens Reticle Focus
Diopter
Center Focus
Twist-Up Eyecup
Strap Attachment
Images are for representation only. Product may vary slightly from what is shown.
2
Tripod Adapter Socket
Objective Lens
3
BASIC OPERATION
Adjust the Eyecups
The eyecups on Triumph® HD twist up and down allowing anyone to obtain a full field of view and comfortable viewing despite differences in facial structure and for use with or without glasses.
When not using glasses, generally the eyecups will be fully extended. When using glasses, generally the eyecups will be fully collapsed.
Adjust the Interpupillary Distance
The interpupillary distance (IPD) is the distance between the centers of the left and the right eye pupils. Match the IPD of your eyes to the binocular so that you see a single image free of edge distortion.
IPD
Distance between the centers of the ocular lenses.
Rotate the binocular barrels inward or outward to line your eyes up with
ocular lenses.
4
Triumph® HD
Focus the Binocular
For the best results, follow this two-step process to properly adjust the center focus and diopter. Choose an object about 20 yards away from you and stay in the same spot until you have adjusted the binocular for your eyes.
Center Focus Diopter
1. Adjust the Center Focus Start by closing your right eye or covering the right objective lens with your hand. Look through the left barrel and adjust the center focus wheel until the image is in focus. Leave the center focus in position as you adjust the diopter.
2. Adjust the Diopter Start by closing your left eye or covering the left objective lens with your hand. Look through the right barrel and adjust the diopter until the image is in focus. Make note of the position of the diopter setting in case you need to set it again. From this point on, you will only need to use the center focus wheel.
5
ACCESSORIES
GlassPakTM Binocular Harness
The GlassPakTM Binocular Harness stores and protects your binoculars while keeping them close at hand for quick deployment. Tethers attach to your binocular for added security against accidental drops while the fully adjustable straps create a comfortable fit.
Binocular Case
Harness Straps
Binocular Tether Straps
6
Triumph® HD
Follow these steps to attach the binocular tether straps.
1. Thread the wide end of the binocular tether straps through the harness strap buckles.
2. Size to fit by adjusting the one-size-fits-all harness strap.
3. Thread the binocular tether straps through the strap attachments on binocular.
4. Thread the binocular tether straps back through the tether strap buckles to secure.
7
Lens Covers
The Triumph® HD comes with tethered objective lens covers and a rainguard for the ocular lenses. Use these covers to protect the lenses whenever you are not using your binocular.
Neck Strap
Attach the padded neck strap in these three simple steps:
1. Push a few inches of the strap through the strap attachment on the binocular.
2. Hold the buckle and thread the end of the strap through the buckle.
3. Adjust the overall length, then pull tight until the strap is secured within the buckle.
Note: If using another type of strap, never attach metal o-rings directly onto the strap attachment.
8
Triumph® HD
MAINTENANCE
Cleaning
Your binocular requires very little routine maintenance other than periodically cleaning the exterior lenses. The binocular exterior may be cleaned by wiping with a soft cloth. When cleaning the lenses, be sure to use products that are specifically designed for use on coated optical lenses. · Be sure to blow away any dust or grit on the lenses prior to
wiping the surfaces. · Using your breath, or a very small amount of water or pure
alcohol, can help remove stubborn dried water spots.
Lubrication
All binocular components are permanently lubricated, so no additional lubricant should be applied. Note: Other than to remove the Rainguards, Objective Lens Covers, and Tripod Adapter Socket Cap, do not attempt to disassemble any binocular components. Disassembling of binocular may void warranty.
Storage
If possible, avoid storing your binoculars in direct sunlight or any very hot location for long periods of time. Caution: Binoculars are not intended for looking at the sun, or any other intense light source. Such viewing could damage the retina and cornea of your eyes even to the point of causing blindness.
9
NOTICE
Virtual Patent Marking Notice By Vortex Optics
This product may be protected by patents in the U.S. and elsewhere for Vortex Optics. http://vtx.legal website is provided to satisfy the virtual patent marking provisions of various jurisdictions including the virtual patent marking provisions of the America Invents Act and provide notice under 35 U.S.C. §287(a). Please visit http://vtx.legal to view list of products that may be covered by one or more U.S./ Foreign patents or published patent applications.
10
Triumph® HD
VIP WARRANTY
OUR UNCONDITIONAL PROMISE TO YOU.
We promise to repair or replace the product. Absolutely free.
Unlimited. Unconditional. Lifetime Warranty.
You do not have to register, save the box, or a receipt for the Warranty to be honored.
Learn more at VortexOptics.com [email protected] · 1-800-4VORTEX Note: The VIP Warranty does not cover loss, theft, deliberate damage, or cosmetic damage not affecting product performance. For the most up to date manual visit VortexOptics.com
11
M-00332-0 © 2022 Vortex Optics ® Registered Trademark and TM Trademark of Vortex Optics. Patent Pending
Vortex Optics - Home
Legal Patents
