Memphis Audio Sbt1 Bluetooth Streaming Device Instructions

MEMPHIS AUDIO SBT1 Bluetooth Streaming Device

INSTRUCTIONS

1. Connect Bluetooth receiver’s RCA terminal to amplifier RCA AUX input.
2. Wire ground to the negative terminal of your 12v battery
3. Wire positive to ignition lead. SBT1 will turn off when the ignition is off
4. Turn on Bluetooth in the settings of your desired streaming device
5. Select device “Memphis Amplifier”
6. If prompted, enter the following four-digit passcode: 0000 (this is a one-time step required for setup)
7. Begin streaming your music!

SBT1
Bluetooth Streaming Device Marine Grade Construction BLUETOOTH

800.489.2300
www.memphiscaraudio.com 122 Gayoso Ave.
Memphis,TN, USA

References

• MEMPHIS AUDIO - Memphis Audio