Louis Vanucci Motorcycle Jackets And Pants For Non-professional Motorcycle Riders Instructions

Louis Vanucci Motorcycle Jackets And Pants For Non-professional Motorcycle Riders Instructions

Louis Vanucci Motorcycle Jackets and Pants for Non-Professional Motorcycle Riders Instructions

Please read these instructions for use of protective clothing for motorcycle riders in on-road traffic carefully before use, follow the notes mentioned, and keep these instructions safe until the end of use.

General information

EU requirements

These garments for motorcycle riders fulfill the basic Health and Safety requirements of Regulation (EU) 2016/425.

Conformity with the requirements set down in this regulation has been proven by means of an EU type examination performed by a notified body. You will find a list of notified bodies on the first page of these instructions for use.

The identification number of the institute that performed the EU type examination for this specific PPE can be found in the product-specific section of this user information.

The following label is affixed to all protective garments for motorcycle riders in road traffic (hereinafter referred to as “garments”) and contains the information described:

Example

EU Example

  1. Trade name of PPE
  2. item number of PPE
  3. Specific symbol indicating use of the garments when riding a motorcycle
  4. Performance class
  5. European standard
  6. Manufacturer’s declaration of conformity with Regulation (EU) 2016/425
  7. Reference to information material

Important note: We recommend leaving the label on the product to be able to prove conformity with the applicable European regulation.

Conformity with the type test is ensured based on internal production control. The EU Declaration of Conformity can be found online on the specific product page of the website www.louis.eu.

General performance features

The garments were tested in accordance with the European standard EN 17092: 2020. The standard EN 17092: 2020 classified the following classes of motorcycle garments:

  • AAA Protective garments for higher requirements
  • AA Protective garments for medium requirements
  • A Protective garments for lower requirements
  • B Protective garments for lower requirements against abrasion and without impact protection
  • C Protective garments for impact protection but without abrasion protection.

The different classes of protection have been introduced to make sure that certified protective motorcycle clothing is suitable for as many motorcycle riders as possible. The degree of risk or hazard that a motorcyclist will face is closely linked to the type of riding and the nature of the accident. Riders are cautioned to carefully choose motorcyclists’ protective garments that match their riding activity and risks. Other garments or garment combinations certified according to the series of standards EN 17092-1, EN 17092-2, EN 17092-3, EN 17092-4, EN 17092-5, or EN 17092-6 may provide more appropriate protection than this garment but there may be weight or ergonomic (e. g. range of motion restrictions) or heat stress penalties associated with their use, that may be less appropriate for some riders‘ activities.

An overview about the requirements for the different classes can be found in table 2 at the end of this user information.

The overall performance is classified based on the lowest result from all the required tests.

The performance classes achieved in the individual tests are listed in the product-specific section within this user information.

Safety

Intended use

The garments described in this information for use are made to be worn when riding motorcycles in on-road traffic.

The garments can protect against weather conditions, without restricting the wearer‘s freedom of movement unnecessarily. In addition, the garments can provide a certain degree of mechanical protection to the wearer’s body in the event of an accident.

The particular hazards associated with motorcycle accidents consist, on the one hand, of falling off the motorcycle and, on the other hand, collisions with other vehicles or solid objects at the roadside. In addition, mechanical forces and grazing as a result of landing on the ground pose a risk of injury.

Restrictions

The garments do not protect against chemicals, extreme heat, naked flames, extremely low temperatures or other risks and hazards that are not mentioned in these instructions for use.

No personal protective equipment (PPE) can offer indefinite protection against the risks associated with a fall or accident. No garment can completely rule out injury to the body. Riding motorcycles is a dangerous activity in general, and the use of this PPE cannot guarantee that severe personal injuries will be prevented.

How to use

Your body measurements will help you to find the correct size of the clothing. The corresponding body measurements can be found online on the specific product page of the website www.louis.eu and at the end of this user information. If you meet question please do not hesitate to come into our shops.
Size

Choose your garments size so that it is comfortable but close-fitting. Please close all zippers, buttons and Velcro fasteners carefully. The width can be adjusted with the available adjustment systems and should be used to make the garment fit your body perfectly. Please secure and tighten them properly.

It is best to check the fit of the garments by sitting on your motorcycle. The garments should be close-fitting without causing any uncomfortable pressure points on your body. Please choose the clothing neither too big nor too small to avoid it moving freely or causing pressure somewhere on your body.

The available protectors must sit tightly and precisely over the areas to be protected. If necessary, the position of the height-adjustable protectors must be adjusted. This can be done while using the Velcro fasteners at the protectors and in the protector pockets.

In the style-specific part of this user information you can find an overview about the incorporated and retro-fitting protectors. Information regarding the retro-fitting protectors can be found on the labels attached on the protector pockets. Please install all protectors available for the garment to get an overall impact protection on all areas of your body.

Do not use this PPE without the removable protectors and make sure they are placed in the correct position before wearing the garments on the motorcycle. Only with correctly installed protectors can the PPE provide its full protection.

The garments come with connection zippers. Please use them to connect
jackets and pants with each other while driving. This is to make sure there
won´t be an opening between these two pieces and your body is protected
all over. In addition please check that your jacket cuffs can be worn over
or underneath your gloves cuffs and that both have an overlap of at least 15 mm. The pants should overlap the bootlegs to make sure the body is also properly protected in this area.

Please keep in mind that the entire body must be protected when riding motorcycles, and that you should always wear the appropriate equipment from head to toe (helmet, jacket, trousers, protectors, gloves in accordance with EN 13594 and boots in accordance with EN 13634) or high visibility clothing or accessories in accordance with EN 13356.

Correct Use

Safety checks

It is essential that the following instructions be observed, as this is the only way to ensure that the original protective capacity of the garment is maintained.

Never use solvents or other aggressive substances for cleaning. Contact with unapproved substances or incorrect care of the clothing may significantly affect their features and reduce the protection they provide. The garment should not be exposed to high or low temperatures.

The clothing must not be dyed, nor may adhesive labels be attached. No modifications to the product, however small they may seem, are permitted. Such incorrect treatment as mentioned above may result in reduced protection. At worst, the clothing may become ineffective. Detlev Louis Motorrad-Vertriebsgesellschaft mbH (Switzerland: Detlev Louis AG) cannot accept any claims for compensation or for repair resulting from incorrect treatment.

The garment should be checked for holes, tears, seams coming unstitchedv etc., every time they are worn.

If you notice any damage to the garment, you must replace it.
Also check that the protectors are undamaged and securely attached to the garment. Check that the hook-and-loop fasteners are clean and function properly and securely.

As soon as your clothing or parts of the clothing start to show signs of wear, it is time to replace it.

A fall and/or crash may damage important components of the garment, so it will no longer provide the limited protection described above. Such damage may not be visible to the naked eye. You should therefore always replace your garment after a fall.

Label

The garments come with a production label for clear identification and traceability.

  • Date of manufacture Manufacturer number/order number Country of manufacture.
    Label
  • Item number
    Label

Durability

The durability of the clothing depends on the type and duration of use, and the degree of care. Some forms of damage are not always recognisable by simple visual inspection. As a general principle, this PPE must be replaced
eight years from the date of manufacture, even if it does not appear to be damaged.

Information on the material and correct cleaning

The material composition of your clothing can be found on the information labels in your clothing or on our website: www.louis.eu

The clothing should be cleaned regularly with a suitable care product. Never use solvents or other aggressive substances for cleaning.

Please observe the care instructions on the information label sewn into the clothing.

You will find more care instructions on our website: www.louis.eu

Correct storage, transport and disposal

The clothing must be stored in a dry and well-ventilated place. Do not expose it to sunlight or direct heat sources.

Ensure that the clothing cannot be damaged by kinking, knocks, falling or other impacts, and you should not place heavy objects on it. Avoid storing your garment in such a way that its own weight is carried by a few individual points. After use, let your garment air-dry at room temperature. Never use a hairdryer or similar device, or place the garment directly on a radiator, as this may cause damage. When transporting the garment, do not leave it in a closed vehicle for an extended period of time, and do not expose it to very high or very low temperatures. Make sure that no heavy objects are placed on top of the garment during transportation.

The clothing was made using selected materials which are classified as being harmless to humans according to current knowledge. Garments that are no longer usable must be disposed of in accordance with the applicable environmental regulations, unless otherwise indicated.

Contact

If you have any questions about the product and/or these instructions, before using the product for the first time, please contact our Service Centre by e-mail at: [email protected]. We will help you as quickly as possible. This is the best way to ensure that your product is used correctly.

Zoning according to EN 17092-1: 2020
Zoning
Pants

Protectors according to EN 1621-1/-2/-3/-4

 

Class

AAA

AAABC
Knee – K*
Hip – H*

+

Airbag-Hose – AH*

+

+

+

Jackets

Protectors according to EN 1621-1/-2/-3/-4

Class

AAA

AA

A

B

C

elbow- E*

 

mind. 1* Protector

shoulder-S*

move-R*
+++
Brust – B*+++mind. 1 Protector

*

lowerback-UR*
+++
Airbag-Jacke- AJ*+++
  • K* = Knee
  • H* = Hip
  • AH* = Airbag-Hose, Airbag-Pants
  • E* = Elbows
  • S* = Shoulders
  • R* = Back
  • B* = Breast
  • UR* = Lower Back
  • AJ* =Airbag-Jacket
  • √ * = mandatory
  • +* = option
  • * = mind. min. 1 Protector,
  • – = Non

Tear strength of the Structural strong layer (SSL) in

Class

AAAAAABC
Zone 15040353525
Zone 25040252525
Zone 33530252525
Protector- bags1010101010

Abrasion resistance of the structural strong layer (SSL)

Class

AAA

AA

A

B

C

Zone 1

707412265265

n/a

Zone 2

442

265147147

n/a

Zone 3265147

n/a

n/a

n/a

Ladies

Sizes to order

InchBreast circumferenceWaist circumferenceBody height

Normal

32

XXS2675 – 78

59 – 62

168

34

XS2779 – 8263 – 66168
36S2883 – 86

67 – 70

168

38

M2987 – 9071 – 74168
40L3091 – 94

75 – 78

168

42

XL3195 – 9879 – 82168
44XXL3299 – 102

83 – 86

168

46

3XL33103 – 10887 – 92168
484XL34109 – 114

93 – 97

168

50

36115 – 12098 – 102168
5238121 – 126

103 – 107

168

54

40127 – 132108 – 112168
5642133 – 138

113 – 117

168

short

16

XXS2675 – 7864 – 66160
17XS2779 – 82

67 – 69

160

18

S2883 – 8670 – 72160
19M2987 – 90

73 – 76

160

20

L3091 – 9477 – 81160
21XL3195 – 98

82 – 86

160

22

XXL3299 – 10287 – 91160
233XL33103 – 108

92 – 97

160

24

4XL34109 – 11498 – 104160
25115 – 120

105 – 110

160

Ladies

long

64

XXS2675 – 7862 – 64176
68XS2779 – 8265 – 67

176

72

S2883 – 8668 – 70176
76M2987 – 9071 – 74

176

80

L3091 – 9475 – 78176
84XL3195 – 9879 – 83

176

88

XXL3299 – 10284 – 88

176

92

3XL33103 – 10889 – 94

176

Men

Sizes to orderInchBreast circumferenceWaist circumference

Body height

Normal

44

XXS3086 – 8976 – 80177 – 183
46XS3190 – 9381 – 85

178 – 184

48

S3294 – 9786 – 90179 – 185
50M3398 – 10191 – 95

180 – 186

52

L34102 – 10596 – 100181 – 187
54XL36106 – 109101 – 104

182 – 188

56

XXL38110 – 113105 – 109183 – 189
583XL40114 – 117110 – 113

184 – 190

60

4XL118 – 121114 – 118185 – 191
624XL122 – 125119 – 123

185 – 191

64

5XL126 – 129124 – 128185 – 191
665XL130 – 133129 – 133

185 – 191

68

6XL134 – 137134 – 138185 – 191
706XL138 – 141139 – 143

185 – 191

72

7XL142 – 145144 – 148

185 – 191

Men

Sizes to order

InchBreast circumferenceWaist circumference

Body height

short

22

XXS3086 – 8978 – 82169 – 175
23XS3190 – 9383 – 87

170 – 176

24

S3294 – 9788 – 92171 – 177
25M3398 – 10193 – 97

172 – 178

26

L34102 – 10598 – 102173 – 179
27XL36106 – 109103 – 106

174 – 180

28

XXL38110 – 113107 – 111175 – 181
293XL40114 – 117112 – 115

176 – 182

30

4XL42118 – 121116 – 120177 – 183
314XL44122 – 125121 – 125

177 – 183

32

5XL126 – 129126 – 129177 – 183
335XL130 – 133130 – 133

177 – 183

long

90

XXS3086 – 8976 – 80183 – 189
94XS3190 – 9381 – 85

184 – 190

98

S3294 – 9786 – 90185 – 191
102M3398 – 10191 – 95

186 – 192

106

L34102 – 10596 – 100187 – 193
110XL36106 – 109101 – 104

188 – 194

114

XXL38110 – 113105 – 109189 – 195
1183XL40114 – 117110 – 114

190 – 196

Stand In data 01/2021

Exklusiv-Vertrieb:
Detlev Louis Motorrad-Vertriebsgesellschaft mbH
Rungedamm 35 · 21035 Hamburg · Germany
Tel.: 00 49 (0) 40 - 734 193 60
www.louis.de · [email protected]

Detlev Louis AG
Oberfeld 15 · 6037 Root LU · Switzerland
Tel.: 00 41 (0) 41 - 455 42 90
[email protected]

Logo

 

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals