Metropolitan N6550-690 Magnolia Manor 2 Light Wall Sconce Instructions

N6550-690 Magnolia Manor 2 Light Wall Sconce

Product Information

Product Name: Item#N6550-690

Date of Manufacture: 2021/05/10

Installation Manual: LA-3361E

Product Usage Instructions

Mounting the Fixture

1. Shut off power at the fuse box or circuit breaker box.
2. Remove the old fixture, including the mounting hardware.
3. Unpack your new fixture and lay out all the parts in a clear
   area, taking care not to misplace any small parts necessary for
   installation.
4. Loosen screws (D) to remove mounting plate (A) from fixture
   body (C).
5. Attach mounting plate (A) using mounting screws (B)
   (#8-32N*L0.5) to the junction box. Ensure that the side of the
   mounting plate marked GND faces out.
6. Place plastic washer (F) over all thread (G) and screw fixture
   loop (E) to all thread (G).

Connecting the Wires

Refer to Fig. 2 for wire connections.

6. Connect the electrical wires, ensuring all wire connectors are
   secured. If there is a ground wire (green or bare copper) in the
   junction box, connect the fixture’s ground wire to it. Otherwise,
   connect the fixture’s ground wire directly to the mounting plate
   (A) using the provided green screw.
7. Tuck wire connections neatly into the junction box.

Finishing the Installation

7. Place fixture body (C) over mounting plate (A) and secure with
   screws (D).
8. Place candle covers (K) over sockets (J).
9. Install two candelabra base bulbs (L) with a maximum wattage of
   60 watts each or CFL or LED equivalent (not included), following
   the fixture’s specification. Do not exceed the maximum wattage
   rating.
10. Attach crystal drop (I) on finial (H).

Your installation is now complete. Restore power and test the
fixture. Note that the illustration in the manual (Fig.1) is for
installation purposes only and may not be identical to the
purchased fixture.

Note: For further information or
troubleshooting, refer to the complete installation manual
LA-3361E.

INSTALLATION INSTRUCTIONS

Item#N6550-690 (New. 2021/05/10) READ AND SAVE THESE INSTRUCTIONS
W AR NI N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

MOUNTING THE FIXTURE (Fig.1)

Fig. 1

1. Shut off power at the fuse box or circuit breaker box

and remove the old fixture including the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any

Set#A-021-118DH -Mounting Screw*2 -Ground Screw -Mounting Plate

small parts necessary for installation.

3. Loosen screws (D) to remove mounting plate (A) from fixture body (C).

E

L

4. Attach mounting plate (A) using mounting screws (B)

F

(Size: #8-32N*L0.5″) to the junction box (not included).

The side of the mounting plate marked “GND” must face out.

G K

5. Place plastic washer (F) over all thread (G). Screw

fixture loop (E) to all thread (G).

J

CONNECTING THE WIRES (Fig. 2)

6. Connect the electrical wires as shown in Fig. 2, making

sure that all wire connectors are secured. If your

junction box has a ground wire (green or bare copper),

connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the green screw provided.

A B D

Tuck wire connections neatly into junction box.

C

H

FINISHING THE INSTALLATION (Fig.1)

7. Place fixture body (C) over mounting plate (A), and

I

secure with screws (D).

8. Place candle covers (K) over sockets (J).

9. Install (2) two candelabra base bulbs (L) up to 60 watts

each or CFL or LED equivalent (not included) in accordance with the fixture specification. –DO NOT Candle cover#CCV24110P-209

EXCEED THE MAXIMUM WATTAGE RATING! (NE

PAS DEPASSER MAXIMALE!)

LA

PUISSANCE

NOMINALE Fig. 2

10. Attach crystal drop (I) on finial (H). Your installation is now complete. Return power and

FIXTURE WIRES Black or Smooth

FIXTURE WIRES White or Ribbed

FIXTURE WIRES Green or Bare Copper (Ground)

test the fixture.

Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

HOUSE WIRES Black (Hot)

HOUSE WIRES White (Neutral)

HOUSE WIRES Green (Ground)

LA-3361E