Orchard Audio SK_MONO Starkrimson Monoblock Amplifier
Starkrimson® Mono Instructions
Note:
- Do not power or operate amps without speakers connected.
- Do not plug a live power supply into the amplifier.
- Due to the bridged amplifier design both speaker terminals are hot when the amplifier is on.
High Voltage
Warning
- Do not connect either speaker terminal to GND or EARTH
- No user-serviceable parts – tampering with the amplifier will void the warranty
- For best performance place the amp(s) as close as possible to the speaker(s) and use very short speaker cables.
To turn the amp on:
- Connect Speakers
- Connect Input (XLR or RCA with adapter)
- Plug-in power supply into the amplifier (power supply needs to be off; the green light is off)
- Plug-in power supply into AC outlet
To turn the amp off:
- Unplug from the AC outlet and wait at least 5 minutes for capacitors to discharge
- Remove other connections
Improper powerup or power down of the amps may cause damage and this damage will not be covered under the warranty
