Home Security Cabinet
Installation Instructions
Key #:
Serial #:
IMPORTANT:
Record the serial and key numbers from the back of the cabinet. You will need the serial number information in order to replace lost keys.
Do not store this document in your security cabinet.
Keep keys in a secure place away from children.
NOTE: Assemble shelving and barrel rests before mounting the cabinet to a wall or floor. Exterior access is required for assembling these items. Review these instructions prior to installation.
MODEL GC-908-5
INSTALLATION OF BARREL RESTS AND SHELF
THE BARREL RESTS AND SHELF MUST BE INSTALLED BEFORE MOUNTING THE CABINET TO A WALL AND BEFORE INSTALLING THE FOAM LINING.
Barrel rest assembly
Install the 4-position barrel rests (A) to the back of the cabinet as shown in figure 2.
- Thread the screws into the pilot holes from the outside of the cabinet. (See figure 1)
- Align the holes of the barrel rest over the tips of the screws and lightly press the barrel rest into place. (See figure 1)
- Now tighten the screws from the outside of the cabinet. Tighten each screw partially, alternating from one screw to the other until they are both tight. Do not overtighten.
Shelf assembly
Assemble the shelf inside the cabinet with (4) 10-32 nuts and bolts as shown in figure 2.
Place foam pad (B) in the bottom of the cabinet.
CABINET MOUNTING INSTRUCTIONS
Selecting a Location
Your Security Cabinet should be installed in an isolated, dry, and secure area.
For greater security, the cabinet must be fastened to a solid surface with a minimum space on either side.
Ideally, the cabinet would be installed on the sidewall of a closet. (See figure 3)
The cabinet should be flat against the wall and floor. Remove the baseboard if necessary. (See figure 4)
Insert the plastic plugs in the cabinet’s top mounting holes if you are not installing the Pistol-Ammo cabinet on the top of the security cabinet.
Wall Mount Option
The (4) mounting holes in the rear of the cabinet must line up with the 16″ centers of the wall studs. Drill new holes in the cabinet if necessary. (See figure 4)
Drill (4) 3/16″ pilot holes into the wall studs and secure the cabinet to the wall using (4 ea.) lag bolts and washers. (See figure 4)
Floor Mount Option
The (4) mounting holes in the rear of the cabinet must line up with the 16″ centers of the wall studs. Drill new holes if necessary. (See figure 4)
Drill (2) 3/16″ pilot holes into the wall studs lining up with the top (2) mounting holes in the back of the cabinet. Secure the cabinet to the wall using (2) lag bolts and washers.
Drill (2) pilot holes and secure the cabinet bottom to the floor with (2) lag bolts and washers. 
MODEL GC-900-5
PISTOL-AMMO CABINET ASSEMBLY
IMPORTANT: Install the shelves before mounting the cabinet to a wall.
Install each shelf with (4) 10-32 nuts and bolts. (See figure 5)
Place foam pad in the bottom of the cabinet.
INSTALLATION OF GC-900-5 PISTOL-AMMO CABINET ON TOP OF SECURITY CABINET
NOTE: We recommend that the security cabinet be installed as described above.
IMPORTANT: Install the shelf before mounting the cabinet to a wall.
Remove the top hole plugs from the cabinet by pushing out from the inside of the cabinet.
Place the GC-900-5 on top and assemble with (2) 1/4-20 nuts and bolts. Do not tighten bolts. (See figure 6)
Drill (4) 3/16″ pilot holes into the wall studs and secure the GC-500-5 cabinet to the wall using (2) lag bolts and washers. (See figure 6)
Tighten the (2) bolts that connect the cabinets.
INSTALLATION OF SCOPE STAND-OFF
NOTE: The scope stand-off will function properly for many combinations of guns with scopes.
Screw the scope stand-off into the pilot hole of the barrel rest. (See figure 8)
IMPORTANT
Keep keys away from children. Keep this record of your serial and key numbers in a secure place separate from your security cabinet. If you lose your keys you will need this information as a reference for obtaining new keys. To order a replacement key set, follow the instructions on the attached form.
STACK-ON PRODUCTS COMPANY
P. O. BOX 489
WAUCONDA, IL 60084
Security Cabinets and Safes Key or Combination Requ
“This is not a Registration Form”
Verification of ownership is required in order to receive a replacement key or confirm your combination on your security product.
In order to receive a replacement key or obtain the combination to your security product:
- Complete the following form and send to Stack-On Products.
- Send a copy of your valid driver’s license along with the form.
- Send a copy of the receipt showing the original purchase.
- The security product owner must sign the form.
- The owner’s signature must be notarized.
- Send $10.00 for replacement key or combination. Personal Check, MasterCard, or Visa accepted.
- Send completed information to:
Stack-On Products Company
1360 N. Old Rand Road
P.O. box 489
Wauconda, IL 60084
Serial Number______________________
Key Number (if applicable) _______
Unit Dimensions____________________
Unit Description____________________
Owner’s Name _____________________
Date Purchased___/___/____
Owner’s Address ___________________
Unit or Apt Number ________________
City ___________________________
State _______________
Zip Code________________
Telephone Number: (____)______________
Fax Number: (____)___________________
Owner’s Email Address: ________________
Owner’s Signature ____________________
Notary Signature________________
Notary Commission Expires: _____/_____/_____
Notary Stamp______________________
SERVICE REQUESTED
Combination confirmation: Yes No
$10.00 charge for this service
Key Replacement: Yes No
$10.00 charge for this service
Credit Card Information (Please circle one) MasterCard Visa
Expiration Date: ___/___/___ Card Number:____________________
Credit Card Identification Number (Located on back of card, last 3 digits on signature strip)_________
LIMITED ONE YEAR WARRANTY
SECURITY PLUS STEEL CABINETS AND PISTOL BOXES
Stack-On Products Co. (“Stack-On”) Security Plus Steel Cabinets and Pistol Boxes, are warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase by a consumer. This warranty extends to the initial consumer only.
If you believe there is a defect in material or workmanship in your Security Plus Steel Cabinet or Pistol Box, during the one-year warranty period, please contact our customer service department, by regular mail or email at the address listed below, and include with your correspondence proof of purchase information and the model number of the product.
Stack-On Products Company
1360 North Old Rand Road
Wauconda, IL 60084
[email protected]
If Stack-On is properly notified during the one-year warranty period and, after inspection confirms there is a defect, Stack-On will, at its sole option, provide repair parts or exchange the product at no charge, or refund the purchase price of the product.
THIS WARRANTY DOES NOT COVER ANY PRODUCT, OR ANY PART OF ANY PRODUCT, WHICH HAS BEEN SUBJECT TO EXCESSIVE USE, ACCIDENT, NEGLIGENCE, ABUSE OR MISUSE, INCORRECT MAINTENANCE, ALTERATION, OR REPAIR BY ANYONE OTHER THAN STACK-ON. IN ADDITION, THIS WARRANTY DOES NOT COVER ANY ACCESSORIES OR PARTS USED WITH OR IN THE PRODUCT, WHICH ARE NOT INCLUDED WITH THE ORIGINAL PURCHASE.
THIS WARRANTY IS EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY DISCLAIMED AND EXCLUDED. STACK-ON SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES. STACK-ON NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF STACK-ON’S SECURITY PLUS STEEL CABINET OR PISTOL BOX.
STACK-ON WILL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO THE INITIAL CONSUMER FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, OR PUNITIVE DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ANY STACK-ON SECURITY PLUS STEEL CABINET OR PISTOL BOX.
STACK-ON’S LIABILITY FOR ANY BREACH OF THIS WARRANTY SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT, AS DESCRIBED ABOVE, OR A REFUND OF THE PURCHASE PRICE OF THE PRODUCT.
IN NO EVENT SHALL STACK-ON’S OBLIGATION UNDER THIS WARRANTY EXCEED THE PRICE OF THE PRODUCT.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Documents / Resources
 | SECURITY PLUS STACK-ON Home Security Cabinet GC-908-5 [pdf] Instruction Manual SECURITY PLUS, STACK-ON, Home Security, Cabinet, GC-908-5 |
