ALUMINUM DEW SHIELD
QUICK SETUP GUIDE
MODELS #94020,
94020 Aluminum Dew Shield
If the fit of the dew shield on the lens cell is too loose or too tight, loosen the screws as shown to slightly adjust the clamp length, then retighten the screws.
WARNING: Remove the jacks from the clip in the dew shield before removing the dew shield from the telescope.
2 – YEAR WARNING
celestron.com/support/warranties
© 2021 Celestron ¢ All rights reserved lest
Osterreich: celestron.com
Baader Planetarium GmbH — Zur Sternwarte – 82291 Mammendorf
Tel.: 08145/80890 – [email protected]
Warranty | Celestron
