JBL Endurance Peak In-Ear Wireless Headphones User Guide

ENDURANCEPEAK
Quick Start Guide

WHAT’S IN THE BOX

OVERVIEW

Touch control panel & LEDs

* All touch controls are on the right earbud.

Charging

Fully charge the earbuds along with the charging case before the first use. The charging case is for charging the earbuds only.
a. Charging the case

b. Charging the earbuds

WEARING THE HEADPHONE

Select the ear tips.

Attach the enhancers and ear tips onto the earbuds.

TWISTLOCK™ Technology

Insert the earbuds downwards into your ear. Twist backward to lock in place. Adjust for comfort.

POWERHOOK™: AUTOMATIC POWER ON/OFF

4.1 Take out the right earbud from the charging case and unhook POWERHOOK™, it will power on and enter device pairing mode.

4.2 Take out the left earbud from the charging case, it will power on and automatically connect with the right earbud.

4.3a Standby mode

* You can keep the earbuds in standby mode for up to 3hrs without having to return them to the case, beyond this period the earbuds must be returned to the case for charging.
4.3b To completely power off the earbuds, return them back to the charging case.

BLUETOOTH PAIRING

5.1 If connecting for the first time, the earbuds will enter Bluetooth pairing mode automatically after they are powered on.

5.2 To pair with a new device, tap once, tap again, and hold the touch control panel on the right earbud for 5 seconds.

CONTROLLING MUSIC

MANAGING PHONE CALLS

MONO MODE
Use the right earbud only and put the left earbud back into the charging case.

FACTORY RESET

9.1 Put left and right earbuds into the charging case until the red LEDs are on.

9.2 Tap once on the right earbud touch panel and immediately tap again (<1s) and hold for 10 seconds until the red LED flashes.

WATERPROOF

* Do not put the earbuds in the charging case when the earbuds are wet.

LED BEHAVIOUR

	On		Power on/off (L/R)
	Slow		Low battery (L/R)
	Solid		Charging (L/R)
	Off		Full charging (L/R)
	Fast		TWS pairing (L/R) / Bluetooth pairing ®
	Solid		TWS connected (L/R) / Bluetooth connected ®

SPECIFICATIONS

Model: ENDURANCE PEAK
Bluetooth version: 4.2
Support: A2DP V1.3, AVRCP V1.5, HFP V1.6
Headset Battery type: Lithium-ion polymer (3.7V, 75mAh)
Bluetooth transmitter power < 10dBm
Bluetooth transmitter frequency range: 2.402 – 2.480GHz
Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
Dynamic drivers: 10mm
Frequency Response: 16 – 22 kHz
Charging case battery: 3.7V, 1,500mAh
Earbuds Battery life: Up to 4 hours
Charging time: < 2 hours
Compatibility: Use with Phones, Tablets, Computers

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

HP_JBL_Endurance Peak_QSG_CR_V6