Bulb Head Cop Cam Automic Beam User Manual

Bulb Head cop cam Automic beam

PRODUCT COMPONENTS

• Power/Record Button
• Indicator Light
• Camera Lens
• Night Mode Bulbs
• Memory Card Port
• Charging Port

POWER ON/OFF

To Power On:

• To turn on press and hold
• POWER/RECORD button for 4 seconds.

To Power Off:

• To turn off press and hold
• POWER/RECORD button for 4 seconds.

GETTING STARTED

• • STEP 1: To turn on press and hold POWER/RECORD button for 4 seconds.  LED light will illuminate solid red. Cop Cam™ will start recording video when motion is detected. Ensure Cop Cam™ is oriented as shown so video is upright. (
  • STEP 2: To switch to photo mode press and hold the POWER/ RECORD button for 2 seconds. LED light will illuminate solid green. To take a photo quickly press the POWER/RECORD button once.
  • STEP 3: To retrieve footage, remove memory card by pressing inward to release, then pull out of slot.  Use included USB cable to connect Cop Cam™ to your Computer/Laptop. Access footage following prompts. (Figure D)
  • STEP 4: To charge Cop Cam™, plug into computer/laptop. LED light will alternately flash red and green.