i12 TWS Wireless Earphone
i12 TWS Wireless Earphone
- Bluetooth: 5.0
- Genre: Mixte
- Colour: White
- Waterproof index: IPX5
- Rain resistance: Yes
- Dust resistance: Yes
- Sweat resistance: Yes
- Bluetooth range: 15-25 meters
- Autonomy: 12 hours
- Autonomy: 12 hours
- Compatibility: Works with any Bluetooth-enabled device (phone, computer, home cinema, etc.)
- Case charging method: USB cable
- Brand: inpods, electro, others
FUNCTIONS
- Multifunction touch button
- Microphone: Yes
- Auto Power On
- Automatic pairing: Yes
- Siri / Google Assistant functionality
- Battery life display: Yes
TIPS FOR PAIRING YOUR DEVICE
The left and right earbuds are activated via Bluetooth and can be used together or separately.
- Step 1: Press on the charging case button (a Blue or Red light will turn on)
- Step 2: Open the case lid and take the earbuds out. Important note: turn on the charging case before opening the lid so the earbuds can turn on and connect to our device.
- Step 3: Activate Bluetooth on your device, look for the name i12 in the drop-down list and click on it to start the connection.
- wireless earbuds turn off automatically when disconnected from a Bluetooth device for more than 5 minutes.
USING THE TOUCH FUNCTION:
- Call function: Tap once on either earbud to pick up a call or hang up.
- Volume control: Tap twice simultaneously on one or the other earbud to raise or lower the volume Music mode: Tap once on one of the earbuds when the music ode is active to pause or resume playing.
- Next/Previous function: Tap 3 times simultaneously on one of the earbuds to skip to the next or previous track.
What to do if the pairing is not successful?
If pairing fails, synchronization may not have been done properly. In this case, start over from the beginning. The first step consists in turning on the charging case o that the earbuds turn on. Then, take the earbuds out of the case and turn on your device’s Bluetooth functionality. If all these steps have been respected, pairing hould work.
The earbuds are connected but only one of them works, what should I do?
If during the pairing step only one of the earbuds works, several solutions are available.
Solution number 1: The first thing to do since the earbuds are independent of one another (they can be used on their own or together) is to press on both earbuds at the same time until you hear a voice message saying they are OFF. Once your earbuds are turned off. Repeat the previous step to turn them back on and e lynched together. Then you should be able to hear sound coming from both earbuds.
Solution number 2: If all these steps have not worked, you should charge your earbuds with the charging case because the battery charge indicated at the moment f synchronization concerns the entire set. It is, therefore, possible that one earbud has some charge remaining while the other doesn’t have enough left to work properly. After charging, follow all the previous steps one more time from the beginning and everything should work.
Even after trying all the methods above, my earbuds still don’t work
If your earbuds still don’t synch properly together, there may be a factory defect or maybe one of the earbuds is damaged. In this case, contact customer service to try and find a solution.
Other top electro manual’s:
- electro i12 TWS Wireless Earphone
- imperii Wireless Headphones with Charging Base
- imperii Wireless Headphones with Bluy Charging Base
FAQS
Press and hold the back of the sensor for 10 to 20 seconds. You will hear a beep indicating that the earphone has turned off.
1- When the i12 TWS headset is in normal use, the LED of the headset is flashing blue.
2- When the i12 TWS headset is in use, if the headphone indicator light is red instead of the blue light, it indicates that the battery is low and the headset needs to be charged.
They should hold a charge possibly the cable might not be receiving the right amount of voltage. If you have one can you try using the lightning cable. And charge overnight. If that does not work please return it to Amazon so another can be shipped.
Yes earbuds are compatible with Android phones. Thanks for looking!
Open the AirPods, press and hold the button on the back. The option to connect will appear on the tablet
the earbuds come with a charger case and two pods
Yes, the I12 TWS can connect to laptop, tablet and desktop. To connect the I12 to you device close the laid and open it back up to get it on the pairing mode. Next go to the START menu, click on SETTING then click on DEVICES, turn the Bluetooth ON then click add Bluetooth. Then wait for the I12 to show on the screen then click on it once to connect your device.
You can control the volume from the connected device
●Play/Pause: press power button for once
●Next song: three click the power button of right earbuds
●Previous song: three click the power button of left earbuds
Yes, it will fit.
Yes it will work with iPhone 13
electro i12 TWS Wireless Earphone
Click to Read More electro Manuals
Documents / Resources
electro i12 TWS Wireless Earphone [pdf] User Guide i12 TWS, Wireless Earphone |