Simpol Home SH-CF-706 52 Inch Indoor Ceiling Fan with LED Light
SAFETY TIPS
- To avoid possible electric shock, tum off the electricity at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. 11
- Read all instructions and safety information carefully before instarnng your fan and save these instructions.
- Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code .If you are unfamiliar with electric wiring.please use a qualified and licensed electrician.
- Make sure you have a location selected for your fan that allow clear space for the blades to rotate, and at least seven (7) feet of clearance between the floor and the fan blade tipes. The fan should be mounted at least thirty (30) inches from walls or other upright structures.
- WARNING: The outlet box and ceiling support joist used must be securely mounted,and capable of supporting at least 50 pounds.To reduce the risk of fire,electric shock or personal injury,moi.mt to the outlet box marked acceptable for fan supported and use mounting screws provided with the outlet box.The box must be supported directly by the building structure.
6. WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked ” acceptable for fan support• and use mounting screws provided with the outlet box most outlet boxe.s commonly used for the support of lighting fixtures are not acceptable for fan support and meyy need to be replaced. Consult a qualified electrician if in doubt.
7. Electrical diagrams are for reference only.Light kits that are not packed with the fan must be U. L. listed and marked suitable for use with the model fan you are installing . Switches must be U. L. general use switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
8. After installation is complete.check that all connections are absolutely secure.
9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
10. WARNING:To reduce the risk of electrical shock and fire, do not use this fan with any solidstate fan speed control device.or rheostat.
11. Do not operate the reverse switch until the fan has come to a complete stop.
12. Do not insert anything into the fan blades while they are rotating. 1:S. WARNING:To reduce the risk of personal injury do not bend the blade brackets (also referred to as ’11anges”) during assembly or after installation. Do not insert objects in the path of the blades.
14. To avoid personal injury or damage to the fan and other items.be cautious when working around or cleaning the fan.
15. Do not use water or detergent when cleaning tne fan or ran blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
