5418-2 Grabber Hook Elements
Product Information
- All dimensions are in inches and metric.
- All specifications are subject to change without notice.
- Registered trademarks are the property of their respective
companies. - Made in USA
- Product Name: PomonaACCESS
- Manufacturer: Pomona Electronics
- Manufacturer Contact: (800) 444-6785 or (425) 446-6010
- Manufacturer Website: www.pomonaelectronics.com
Product Usage Instructions
- Remove the cap from the housing assembly to expose the contact
(see Figure #1). - Insert the wire into the cap assembly, allowing approximately 1
to 2 inches of wire to extend beyond the cap. - Strip wire 1/8 to 3/16 inches.
- Insert the exposed conductor through the hold in the contact
and solder to surface. - Important: Ensure that the solder does not extend beyond the
indicated width (see Figure #2). - Install the cap onto the housing assembly and align the contact
with the slots located on the cap (see Figure #3).
Note: Always refer to the latest revision of the product manual for
updated specifications and instructions. For technical assistance,
contact the manufacturer at 800-241-2060.
Model 5418 With Assembly Instructions Do-It-Yourself Minipincer® Test Clip
FEATURES: · Ideal for conneting to small circuit board components · Use with Model #’s 5173, 3690, 122505A or any other Pomona “Do-It-Yourself” product to create custom cables · Supports 20 to 22 AWG wire
MATERIALS: Contact: Beryllium Copper, Alloy 165 per QQ-C-533, ¼ HM Spring: Stainless Steel, 302 Finish: Contact Gold plated per MIL-G-45204, Type 1, Class 00 Insulation: Glass filled Nylon
RATINGS: Operating Temperature: +80°C. (+176°F.) Max. Operating Voltage: 300 VRMS/DC Current: 5 Amperes
ORDERING INFORMATION: Model 5418-* *=Color, -0 Black, -2 Red, -1 Brown, 3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
All dimensions are in inches and metric. All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA
5/21/02 SY/EH/LS Last saved by PN
Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060
S:EngineeringReleaseDataSheetsFlukeDataSheet d_AI_5418_2_01.doc
PomonaACCESS 90592 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com
Page 1 of 2
Downloaded from Arrow.com.
Model 5418 With Assembly Instructions Do-It-Yourself Minipincer® Test Clip
FIGURE #1 A. Remove the cap from housing assembly, the contact will now be exposed. B. Insert the wire into the cap assembly allowing approximately 1 to 2 inches of wire to extend beyond the cap. C. Strip wire 1/8 to 3/16 inches. D. Insert exposed conductor through the hold in the contact and solder to surface.
FIGURE #2 E. Important: Solder must not extend beyond the indicated width.
FIGURE #3 F. Install the cap onto the housing assembly. Align the contact with the slots located on the cap.
All dimensions are in inches and metric. All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA
5/21/02 SY/EH/LS Last saved by PN
Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060
S:EngineeringReleaseDataSheetsFlukeDataSheet d_AI_5418_2_01.doc
PomonaACCESS 90592 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com
Page 2 of 2
Downloaded from Arrow.com.
Pomona Electronics | Performance and Dependability
