MR11M0189 Swivel Hydraulic Beauty Salon Chair
Product Information
Model Number: MR11M0189 MR11U0249
Brand: RESHABLE
Material: Sponge + oak wood + PU leather
Max Weight Capacity: 330LBS
Product Usage Instructions
Tools Required
A wrench and an allen key are required for the assembly of the
product. Please note that these tools are not included in the
package.
Hardware List
The package includes the following hardware:
- A: 1 piece
- B: 1 piece
- C: 1 piece
- D: 1 piece
- E: 1 piece
- F: 1 piece
- G: 1 piece
- H: 1 piece
- J: 4 pieces
- K: 6 pieces
- L: 3 pieces
- M: 1 piece
- N: 4 pieces
Product Assembly
- Check the package contents to ensure all parts are
included. - Assemble parts A, B, C, and N according to the provided
picture. - Assemble parts D and J as shown in the picture.
- Assemble parts E, F, G, and K according to the picture. Pay
attention to the correct installation direction of the foot
lever. - Assemble parts H and L as shown in the picture.
Frequently Asked Questions
Q: How to maintain the backrest and seat daily?
A: The PU leather should be cleaned regularly. Spray a little of
the leather care solution onto a sponge and then use the sponge to
wipe the leather surfaces gently.
Q: How to maintain the hydraulic pump?
A: Keep the surfaces of the hydraulic pump (including the center
shaft) clean. Add some anti-rust oil to a cloth and then use the
cloth to wipe the center shaft gently.
Q: What is the weight limit for this chair?
A: The weight limit for this chair is 330LBS (150KG).
Q: Can the chair be rotated 360 degrees?
A: Yes, the chair can be rotated 360 degrees.
Q: What if the chair is difficult to rotate?
A: Please check whether the foot bar is stepped to the lowest
position. If not, step on the foot bar several times to lift the
chair. This should solve the issue.
Q: How to prevent the chair from leaning forward?
A: When sitting on the chair, ensure both feet are on the
footrest and sit backward as far as possible. When the guest is
ready to stand up, ask them to put one foot on the ground first and
have someone step on the foot bar to set the chair to the lowest
position.
Q: If the chair keeps tilting and cannot be righted, what
should I do?
A: In this case, there may be something wrong with the
installation. Please check whether the pump pin is completely
inserted into the holes of the bottom tray.
Q: What should I do when the seat cannot be lifted or lowered
normally?
A: If the hydraulic pump is broken, please replace it.
If you have any advice or questions regarding the installation
or product, please provide us with feedback as soon as possible. We
are here to provide you with professional guidance and
assistance.
Sincerely,
RESHABLE Team
User Manual
Model NumberMR11M0189 MR11U0249
Dear Customer,
Thank you for your purchase. RESHABLE is created to be the perfect starting spot for any barbers. Supplying top-quality barber supplies like barber chairs, salon stations, rolling makeup cases, styling drawer cabinets, hair tool holders, and more, we help people to keep their barber store running with the best equipment at the most reliable prices. When you receive the product, please make sure that all the parts are intact. Then please browse the entire installation manual before assembly. If problems occur unsatisfactorily as follows:
a. The outer box is damaged.
b. The product is damaged/bent/cracked while you open the box.
c. The parts/accessories/assembly tools are missing.
d. The product is hard to assemble.
e. The instructions are not clear and can not be referred to.
f. The product has functional problems.
g. Other aspects that you are not satisfied with.
Please do not hesitate to contact us for help (Be sure to mark the SKU NUMBER, e.g., MR11R0246, and the TRACKING NUMBER). Our RESHABLE team with factory direct after-sales service will reply within 24 hours and do our best to resolve the problem for you. Our service is available at any time.
RESHABLE for Profession and Creativity!
Sincerely, RESHABLE Team
1
You need
1 Tools required
A wrench & an allen key are required for the assembly of the product. (not included)
2 2 persons are needed
Technical Specifications
Brand
RESHABLE
Material
Sponge + oak wood +PU leather
Style Max weight capacity
contracted 330LBS
330LBS
2
Hardware List
A 1PC
B 1PC
C 1PC
D 1PC
E 1PC
F 1PC
G 1PC
H 1PC
J 4PCS
K 6PCS
L 3PCS
M 1PC
N 4PCS
PRODUCT ASSEMBLY
Check the package contents before getting started !
A 1PC
B 1PC
C 1PC
N 4PCS
N N
C
N A
N
B
3
4
PRODUCT ASSEMBLY
D 1PC
J 4PCS
D J J
J J
5
PRODUCT ASSEMBLY
E 1PC
F 1PC
G 1PC
K 6PCS
Note: Please refer to the picture for the assembly direction of the foot lever. Do not install it in the wrong direction.
G E
F K
6
PRODUCT ASSEMBLY
H 1PC
L 3PCS
L H
7
Frequently Asked Questions
Q: How to maintain the backrest and seat daily?
A: The PU leather should be cleaned regularly. Spray a little of the leather care solution onto a sponge and then use the sponge to wipe the leather surfaces gently.
Q: How to maintain the hydraulic pump?
A: Keep the surfaces of the hydraulic pump (including the centre shaft) clean. Add some anti-rust oil to the cloth and then use the cloth to wipe the centre shaft gently.
Q: What is the weight limit for this chair?
A150KG (330LBS).
Q: Can the chair be rotated 360 degrees?
A: Yes.
Q: What if the chair is difficult to rotate?
A: Please check whether the foot bar is stepped to the lowest. Then step the foot bar several times to lift the chair. It will be solve.
Q: How to prevent the chair from leaning forward?
A: When you sit on the chair and lean all your weight forward deliberately, the chair will indeed tilt. So please notice this point: if both your feet are on the footrest, please sit backward as far as you can; meanwhile, please ask the barber or someone else to step the foot bar and set the chair to the lowest when the guest sitting on the chair is ready to stand up. (Note: please remind guests not to stand on the footrest with both feet, please put one foot on the ground first.)
Q: If the chair keeps tilting and cannot be righted, what should I do?
A: In this case, there may be something wrong with the installation. Please check whether the pump pin is completely inserted into the holes of the bottom tray.
Q: What should I do when the seat cannot be lifted or lowered normally?
A: The hydraulic pump may be broken. Please replace it.
Dear Customer, if you have any advice or questions on the installation or product after receiving, please give us feedback as soon as possible. We will provide you with professional guidance. Please feel free to use it.
8
